Guide
What is a Delivery Term Code in Foreign Military Sales?
The on a line of a marks how far the U.S. Government moves a shipment before the purchaser takes over. The assigns a code to each line while it develops the case, and an assigned code can be updated by amendment after the case is implemented. On many lines the code's percentage prices the transportation; other lines carry it in the item's price, on a separate line, or not at all, because the purchaser moves the materiel itself.
Each numeric Delivery Term Code sets where the Department of War delivers a shipment, from no movement at all (code 4) to the overseas inland destination (code 7). Title passes much earlier, at the loading facility, unless the LOA says otherwise.
What is a Delivery Term Code?
The is a logistics code that shows how far, from the source of supply toward the final destination, the Department of War is responsible for transporting a shipment; it does not set the or how the transportation is financed [SAMM ]. Title passes separately, to the purchaser at the initial point of shipment unless the specifies otherwise, and where title passes before possession, U.S. Government security responsibility continues until the recipient’s assumes control of the consignment [SAMM ].
The point of delivery is where responsibility for the physical movement of a shipment passes from the Department of War (DoW) to the purchaser. The point of delivery is identified on the by the [SAMM ]. Under the numbered codes, the DoW delivers to a inland point, or to an overseas inland point when origin and destination are in the same geographic area ( 2). It delivers to the either on the inland carrier’s equipment ( 5) or on board the vessel or aircraft ( 8). Overseas, it delivers to the alongside the vessel or aircraft ( 9) or to the inland destination ( 7). Under 4 the purchaser has full responsibility from the point of origin [SAMM ].
The indicates the point in the transportation cycle where responsibility for the physical movement of an shipment passes from the U.S. DoW to the purchaser. The normally specifies a delivery location for every line included in the case. The specifies to what point the U.S. will provide transportation, and, from that point onward, the purchaser provides the transportation [SAMM ]. 5 indicates that the U.S. Government () will sponsor transportation to the . This is normally the [SAMM , ]. 8 indicates pickup of items by the at the point of origin and movement to a DoW-controlled port, where the materiel is loaded aboard the purchaser’s own ship or aircraft [SAMM ].
The source, months and type of assistance, offer release and delivery term codes on line 001 of the sample LOA in SAMM Figure C5.F8. Bandaria is the manual's fictional training country; the figures are the SAMM's example, not a real case. It reads X(16-30) TA4, Z and 8, a mixed-source line released only after advance notice and delivered at the U.S. port of embarkation.
During case development, the determines and assigns the proper for each line of the , and a successful shipment of the materiel depends on that step. When sensitive or classified materials are to be moved, should carry out a pre-case transportation assessment to determine the transportation and distribution requirements, between receiving the and issuing the . Coordination with the J3 of the United States Transportation Command (USTRANSCOM) may be necessary [SAMM ].
Each must be feasible and actionable [SAMM ]. Once the case is implemented, an assigned should be updated by Amendment when required, in coordination with the purchaser [SAMM ].
Where the code travels
There are three major elements involved in the delivery of () materiel to the proper purchasing country address. These elements are the , the requisition, and the system.
During planning before the and the processing of the , various transportation blocks are completed, which identify how items will be shipped, when shipments will be released, where responsibility for physical movement of an shipment passes to the purchaser, and which accessorial charges are applicable. The serves as the authority to export. It is necessary, therefore, that the has a copy of the and all applicable amendments and modifications to the to facilitate shipments to the customer’s country. The purchaser should provide the and any amendments or modifications to the .
Mark-for code. The mark-for code generally indicates the final destination in the customer’s country. The customer enters this code in the mark-for code line at the bottom of page 1 of the . An can contain items that need multiple codes in a given block, such as numerous in-country (mark-for) destinations. These situations might arise for shipments of explosives, classified items, and items with different priorities. If more than one code applies, explanatory notes in the , as additional terms and conditions, identify which items ship to which locations.
Code. The code designates which will receive the shipment. This code is obtained from the . The customer enters this information on the code line on page 1 of the .
Offer/Release Code. The offer/release code indicates when a shipment will be released. Code A indicates the shipping activity will automatically ship without any advance notice. Code Y is entered when the purchaser or its wants advance notice of the shipment. Under Code Y, the shipper will send out a DD Form 1348-5, , advising that shipment is planned. If no response is received within 15 calendar days, the shipment is released automatically [SAMM , ]. Code Z is entered when advance notice is required before release; the shipment cannot be released until the addressee responds [SAMM ]. Storage or staging charges may accrue, and are charged to the case, when an response or a failure to respond requires the items to be held for more than 30 calendar days [SAMM ].
Under Code Z the shipping activity will follow up on the until it receives release instructions [SAMM ].
Offer/release code Z procedures, with an sent before release, must be followed if the materiel is oversize, overweight, hazardous, perishable, pilferable or classified, requires special handling, or moves under 8. Code X identifies materiel that will move through the , or under special shipping instructions [SAMM ].
Accessorial Costs. Table C9.T4 sets the packing, crating and handling rate, and Table C9.T4A sets the transportation percentage for each numbered it prices [SAMM , ]. Estimated packaging costs for non-Defense Working Capital Fund () items are entered in the packing, crating, and handling cost line (9), and transportation costs for non- items are shown on the transportation charge line (11) of the . A dollar amount is entered; the percentage rates used to compute it are not shown on the .
The second major element in the delivery of materiel and related documentation is the requisition. Once an case has been established and funded, applicable transportation/supply codes are copied from the into supply requisitions. For example, the offer/release code, , mark-for code, and code are embedded in requisitions to describe shipping information.
How the code prices transportation
When customers use the , a percentage is applied to the line to compute an estimated amount for transportation costs on the . percentages are based on the transportation provided (e.g., port-to-port or depot-to-in-country destination) and the rate area where articles are being delivered [SAMM , ].
There are several methods of computing the cost of transportation based on the source of the materiel. Transportation costs may be included on the line price of the materiel being shipped, or it may be collected as a separate transportation line on the , or it may be computed as a percentage based on the item value and the . For major systems and components, transportation costs may be computed from estimated actual shipping costs identified in Appendix 2, “Transportation Cost Lookup Table.” For materiel returns and repairs, actual transportation costs may be assessed against the .
For a repair , the will provide a address for each item identified for repair. The Purchaser must assure this address is shown on all containers and documentation when materiel is returned [SAMM ].
Codes that keep the Defense Transportation System in charge
A U.S. Government shipment to an in the United States, or to a country representative at an embassy in the United States ( 5), remains a shipment until the consignee unloads the materiel from the carrier [SAMM ]. A shipment to a DoW-controlled in the United States ( 8) remains a shipment until the materiel is loaded onto the purchaser's ship or aircraft, and the purchaser is responsible for all onward movement and documentation [SAMM ].
For freight shipped via the under 7, the DoW is responsible for transportation, including trans-ocean and overseas inland movement from the point of origin to a specified inland location [SAMM ]. The cost to the United States of transporting purchaser materiel through the is charged to the purchaser on the [SAMM ]. The customer is responsible for unloading the shipment from the inland carrier at the specified location and for all subsequent onward movement.
Try the tools: Transportation charge calculatorDelivery Term Code picker
References
SAMM
- SAMM C7.3: Title Transfer
- SAMM C7.4.1: Delivery Term Code.
- SAMM C7.T6: Offer Release Codes
- SAMM C7.11.1: Notice of Availability.
- SAMM C9.T4: Table of Charges
- SAMM C9.T4A: Table of Delivery Term Codes and Percentage
- SAMM C7.4.2
- SAMM C5.F10: Letter of Offer and Acceptance Information
- SAMM C5.F11: Instructions for Preparing a Letter of Offer and Acceptance
- SAMM C6.T7: Modification for Foreign Military Sales Cases
- SAMM C7.6.2.7: Shipments by the U.S. Government to a Freight Forwarder or Embassy (DTC 5).
- SAMM C7.6.2.8: Delivery on Board a Purchaser-Controlled Ship or Aircraft at a Department of War Port of Embarkation (DTC 8).
Facts referenced
- Calendar days a shipping activity waits for a response to a Notice of Availability under Offer Release Code Y before releasing the shipment automatically (Table C7.T6): 15 calendar days (as of 11 September 2026; SAMM C7.T6)
- Calendar days an item may be held on a Notice of Availability response (or failure to respond) before storage or staging charges may accrue to the FMS case: 30 calendar days (as of 26 October 2026; SAMM C7.11.1)
Related
Delivery Term Code (DTC)
A single-character logistics code that shows how far, from the source of supply to the final destination, the Department of War is responsible for transporting a shipment; it does not set the mode of transportation or how the movement is financed [SAMM C7.4.1].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Letter of Offer and Acceptance (LOA)
The legal instrument that lists the defense articles and services, including training, that the U.S. Government transfers to a foreign country or international organization, with their estimated costs and the terms and conditions. The benefitting partner does not sign a Building Partner Capacity (BPC) LOA.
The Letter of Offer and Acceptance (LOA) is the instrument the U.S. Government uses to sell under the Arms Export Control Act (AECA); signed LOAs and their later Amendments and Modifications are also called Foreign Military Sales (FMS) cases [SAMM C5.6.1].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Foreign Military Sales (FMS)
The part of U.S. security assistance, authorized by the Arms Export Control Act (AECA), in which eligible foreign governments and international organizations buy defense articles, services and training from the U.S. Government under formal government-to-government agreements.
The articles come either from Department of War stocks or from new procurement under contracts the Department manages [22 U.S.C. 2761, 22 U.S.C. 2762]. A sale is FMS whatever the source of the purchaser's financing.
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Implementing Agency (IA)
The military department or defense agency responsible for the execution of military assistance programs. With respect to FMS, the military department or defense agency assigned responsibility by the Defense Security Cooperation Agency to prepare an LOA and to implement an FMS case. The implementing agency is responsible for the overall management of the actions that will result in delivery of the materials or services set forth in the LOA that was accepted by a foreign country or international organization.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Mode of Transport
One of, or a combination of, the following modes used for a movement:
inland surface transportation (rail, road, and inland waterway);
sea transport (coastal and ocean);
air transportation; and
pipelines.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Designated Government Representative (DGR)
A person or persons duly authorized by a foreign government to act on behalf of that government to negotiate, commit, sign contractual agreements, and/or accept delivery of materiel.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Continental United States (CONUS)
U.S. territory, including the adjacent territorial waters, located within the North American continent between Canada and Mexico. Does not include Hawaii or Alaska.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
DTC: Delivery Term Code
SAMM Acronyms, as of 12 September 2026
CONUS: Continental United States
SAMM Acronyms, as of 12 September 2026
Port of Embarkation (POE)
A military or commercial air or ocean port at which a carrier begins the journey to deliver materiel to the consignee. This is also referred to as the Port of Exit.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Port of Debarkation (POD)
A military or commercial air or ocean port at which materiel is offloaded. Also referred to as the Port of Discharge.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
FMS: Foreign Military Sale
SAMM Acronyms, as of 12 September 2026
LOA: Letter of Offer and Acceptance
SAMM Acronyms, as of 12 September 2026
Freight Forwarder
A commercial import/export company registered with the Department of State, Bureau of Political-Military Affairs, Directorate of Defense Trade Controls and under contract to the Foreign Military Sales customer which arranges transportation of materiel from a point specified in the Letter of Offer and Acceptance to the final destination.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Defense Transportation System (DTS)
The part of the worldwide transportation infrastructure that supports Department of War transportation needs in peace and war, made up of military (organic) and commercial resources that are organic to the Department, under contract to it or controlled by it [SAMM C7.6.1].
It takes in organic and commercial aircraft and ships, commercial small-package services under Department contract, and U.S. military air and ocean terminals in and outside the United States.
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Letter of Request (LOR)
The term used to identify a request from an eligible FMS participant country for the purchase of U.S. defense articles and services. The request may be in message or letter format.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
SAMM: Security Assistance Management Manual
SAMM Acronyms, as of 12 September 2026
Glossary entry →Security Assistance Management Manual (SAMM) →
Security Cooperation
Activities by which the Department of War encourages and enables international partners to cooperate with the United States toward strategic objectives, spanning every interaction with foreign defense and security establishments and every security assistance program the Department administers.
Under chapter 16 of Title 10, their purposes are to develop allied and friendly security capabilities for self-defense and multinational operations, to give U.S. forces peacetime and contingency access, and to build relationships promoting specific U.S. security interests [10 U.S.C. 301(7)].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Military Standard Requisitioning And Issue Procedures (MILSTRIP)
The uniform Department of War procedures for requisitioning and issuing materiel within standardized priorities, using standard data elements, codes, forms and transaction formats that foreign governments and international organizations also use by agreement.
The Implementing Agency (IA) or the purchaser may initiate MILSTRIP requisitions under implemented Letters of Offer and Acceptance (LOAs) [SAMM C6.4.3].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Military Assistance Program Address Directory (MAPAD)
The directory of clear-text addresses of country representatives, freight forwarders and in-country customers used to release Foreign Military Sales (FMS) and grant aid shipments processed under Military Standard Requisitioning and Issue Procedures (MILSTRIP), and to send their shipping documents.
The Military Assistance Program Address Directory (MAPAD) is available to Department of War activities, the General Services Administration (GSA), commercial firms, foreign governments and international organizations taking part in FMS or grant aid programs [SAMM C7.7.1].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
MAPAD: Military Assistance Program Address Directory
SAMM Acronyms, as of 12 September 2026
Glossary entry →Military Assistance Program Address Directory (MAPAD) →
Notice of Availability (NOA)
Notice, on DD Form 1348-5, from a shipping activity to a Foreign Military Sales (FMS) purchaser or its freight forwarder that materiel is ready for shipment, in time for the recipient to prepare for receipt and respond with delivery instructions.
The Notice of Availability (NOA) goes to the appropriate address in the Military Assistance Program Address Directory (MAPAD) and coordinates the release of materiel requiring special receipt, export processing or special storage procedures [SAMM C7.11.1].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
NOA: Notice of Availability
SAMM Acronyms, as of 12 September 2026
DTS: Defense Transportation System
SAMM Acronyms, as of 12 September 2026
MILSTRIP: Military Standard Requisitioning and Issue Procedures
SAMM Acronyms, as of 12 September 2026
Glossary entry →Military Standard Requisitioning And Issue Procedures (MILSTRIP) →
Special Assignment Airlift Mission (SAAM)
A dedicated U.S. military aircraft, chartered to deliver sensitive, classified or explosive defense articles to a specific customer location when no commercial delivery capability exists.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
SAAM: Special Assignment Airlift Mission
SAMM Acronyms, as of 12 September 2026
POE: Port of Embarkation
SAMM Acronyms, as of 12 September 2026
SAMM C7.4.1: Delivery Term Code.
“The Delivery Term Code (DTC) is a logistical code that indicates how far, from the source of supply to the final destination, that the DoW is responsible to transport a shipment. The DTC does not determine the mode of transportation or how it is financed. A purchaser may specify a preferred DTC in the Letter of Request (LOR). See Table …”
Security Assistance Management Manual, as of 26 October 2026
SAMM C7.3: Title Transfer
“Title to Foreign Military Sales (FMS) materiel is delivered and passed from the USG to the purchaser at the initial point of shipment unless otherwise specified in the Letter of Offer and Acceptance (LOA). With respect to items procured from a commercial manufacturer, items are typically released for delivery to the purchaser at the manufacturer's loading facility. With respect to …”
Security Assistance Management Manual, as of 26 October 2026
SAMM C5.F10: Letter of Offer and Acceptance Information
“… Term of Sale Dependable Undertaking with 120 days Payment after Delivery, Source Code P (Procurement), AECA, Section 22(b) (22 U.S.C. 2762(b)). 8 Term of Sale Payment 120 days after Delivery, Source Code S, R, E, or F, Stock Sales with 120 days Payment after Delivery; AECA, Section 21(d) (22 U.S.C. 2761(d)). BN-Q-SEH Page 16 A Term of Sale EDA Grant, …”
Security Assistance Management Manual, as of 11 September 2026
SAMM C7.6.2.7: Shipments by the U.S. Government to a Freight Forwarder or Embassy (DTC 5).
“USG Shipments to U.S.-located Foreign Military Sales (FMS) freight forwarders or country representatives located at embassies in the United States are DTS shipments until the consignee unloads the materiel from the carrier.”
Security Assistance Management Manual, as of 11 September 2026
SAMM C9.T4A: Table of Delivery Term Codes and Percentage
“Table C9.T4A. Table of Delivery Term Codes and Percentage Percentages to be used when Shipping from: # Delivery Term Codes Defense Working Capital Fund Other than Defense Working Capital Fund 2 a) Inland origin to inland destination within the continental United States (CONUS)/Canada (except Newfoundland and Labrador) 0.00% 2.75% b) Inland origin to inland destination within a foreign country other …”
Security Assistance Management Manual, as of 5 October 2026
SAMM C7.6.2.8: Delivery on Board a Purchaser-Controlled Ship or Aircraft at a Department of War Port of Embarkation (DTC 8).
“Shipments to a DoW-controlled Port of Embarkation (POE) in the United States are DTS shipments until the materiel is loaded into a purchaser's ship or aircraft. The purchaser is responsible for all onward movement and documentation.”
Security Assistance Management Manual, as of 26 October 2026
SAMM C7.4.2
“During case development, the Implementing Agency’s (IA) role in determining and assigning the proper DTC to each line on the Letter of Offer and Acceptance (LOA) is critical to successful materiel shipment. In cases when sensitive or classified materials are being transported, IAs should conduct a pre-case transportation assessment to determine transportation and distribution requirements following receipt of a LOR …”
Security Assistance Management Manual, as of 11 September 2026
SAMM C7.T6: Offer Release Codes
“Table C7.T6. Offer Release Codes Code Explanation A Shipments are to be released automatically by the shipping activity without advance notice. Note that this code is not to be used if the materiel is oversize, overweight, hazardous, perishable, pilferable, classified, or requires any special handling. X Materiel with an ORC X must have a corresponding X in MILSTRIP record position …”
Security Assistance Management Manual, as of 11 September 2026
SAMM C7.11.1: Notice of Availability.
“A Defense Department (DD) Form 1348-5 “Notice of Availability (NOA)” is sent by Shipping Activities to the appropriate Military Assistance Program Address Directory (MAPAD) address to notify a purchaser or Foreign Military Sales (FMS) freight forwarder that an item is ready for shipment. The purpose of the NOA is to coordinate release of materiel requiring special receipt, export processing, or …”
Security Assistance Management Manual, as of 26 October 2026
SAMM C9.T4: Table of Charges
“Table C9.T4. Table of Charges Charge Description How Priced Applied by - for Billing References Acceleration Rates To recover full cost of providing USG services. Included in the line item value on the Letter of Offer and Acceptance (LOA). Specific to Building Partner Capacity (BPC) cases: Do not charge unfunded civilian retirement. Implementing Agency (IA) DoD Financial Management Regulation (DoD …”
Security Assistance Management Manual, as of 5 October 2026