FMS EdgeFMS Edge — home

Guide

What does the Security Cooperation Organization do in Foreign Military Sales shipping?

Updated 2 November 2026Checked against the SAMM: 26 October 2026

The is not normally involved when a purchaser ships through its own . It becomes involved when the delivers in country, then makes sure the purchaser is ready to receive the cargo, supervises the discharge of classified materiel, passes on release documents and reports damaged or lost shipments. It should not take part in customs matters, and the purchaser pays all customs charges.

What does the Security Cooperation Organization do in Foreign Military Sales shipping?

When the Security Cooperation Organization is involved

The becomes involved when materiel moves through the U.S. , particularly if the materiel is classified or sensitive Arms, Ammunition, & Explosives (). It is not normally involved when a partner ships through its own [SAMM ]. The then ensures that -routed shipments transfer to the purchaser's , and it must ensure that the purchaser is prepared to receive the materiel [SAMM ].

Most will not be routinely involved in transportation issues. Many customers are self-sufficient in arranging for materiel movement and receiving materiel both at ports and in overseas ports of debarkation. However, when the is used to deliver materiel in-country, with Delivery Term Codes () 9 or 7, an in-country U.S. Military Representative (USMILREP), such as the , may get involved. For clarification, the USMILREP may be any of the following:

  • The
  • The Defense Attaché
  • A representative of the U.S. Army Transportation Command ()
  • A Department of War (DoW) employee

Receiving procedures are the purchaser's responsibility, and should make sure the purchaser is ready to receive its materiel. Receiving procedures include [SAMM ]:

  • Clearing the shipments through the purchaser's customs and, where necessary, a third country's customs
  • Checking what arrived against the manifests and shipping documents
  • Reporting discrepancies as appropriate
  • Signing the receipts of ocean or air carriers
  • Having the proper equipment in place or on contract to handle the cargo, as required

Any delay in moving the materiel from the to the purchaser's storage facility could result in storage fees, unsecured cargo or both. should not take part in overseas customs matters for shipments, including payment for the release of cargo [SAMM ]. The purchaser pays all customs charges [SAMM ].

Where U.S. military forces are deployed or positioned in the area receiving the materiel, U.S. Military Terminal Units or Support Activities may support those forces. may ask to have these units carry out some or all of the transportation functions the normally performs, on a not-to-interfere basis [SAMM ].

Classified materiel

The USMILREP is responsible for supervision of the discharge at the destination of classified materiel and equipment moving through the . The may be required to serve as the U.S. , and ensure proper transfer of the classified materiel to the customer’s .

If the is to serve as the U.S. , the responsible individual must be identified in the for the movement of classified materiel [SAMM ]. The is responsible for preparing the [SAMM ]. The case manager should provide a copy of the to the or other USMILREP acting as the U.S. .

Receiving cargo

The extent of the ’s responsibility in the discharge of unclassified materiel shipped through the will depend upon the capabilities of the foreign purchaser. This responsibility may include making arrangements for receipt of the cargo, ensuring establishment by the purchaser of adequate procedures for checking the equipment and materiel against manifests and shipping documents, and providing technical advice regarding proper discharge of cargo. It may also include responding to transportation correspondence and initiating various transportation receipt documents and discrepancy reports as outlined in the Defense Transportation Regulation (), 4500.9-R Part II, Chapter 210, and DLM 4000.25, Defense Logistics Management Standards (), Volume 2, Chapter 17, Supply Discrepancy Reporting. This latter instruction explains how to report shipping or packaging discrepancies caused by the shipper (i.e., overages, damages, or non-receipt) via a by the receiving activity [SAMM , , ].

When a discrepancy occurs in transit on a -routed delivery, the must submit a Transportation Discrepancy Report () on DD Form 361; the purchaser cannot submit a [SAMM ].

Shipping documents

For a ocean delivery, the should receive the shipping documentation as far in advance of the ship's arrival as possible. The documents go to the Type Address Code () 5 and 6 addresses in the , depending on the delivery mode selected. The should also include an email address, so that the advance shipment documentation arrives before the freight does [SAMM ]. In-country customs clearance may also call for commercial invoices and certificates of origin [SAMM ]. Customs clearance is one of the purchaser's receiving procedures [SAMM ].

For shipments on 9 or 7, ensure the successful transfer of the shipments to the purchaser’s [SAMM ]. should use the in the to maintain awareness of these incoming shipments [SAMM ]. Advance notice of incoming shipments plus copies of release documents, manifests, Reports of Shipment (REPSHIP), Cargo Traffic Messages, and Bills of Lading are needed to clear customs at Ports of Debarkation (). A depot release is documented on the DD Form 1348-1A. A vendor release is documented on the Invoicing, Receipt, Acceptance, and Property Transfer (iRAPT) Receiving Report, which replaced the Wide Area Work Flow Receiving Report and the DD Form 250 [SAMM ]. Packing lists in these forms serve as certificates of origin [SAMM ].

Release documents should be mailed by the shipper to the at the 5 or 6 address in the [SAMM ]. The is responsible for providing the release documents to the purchaser to permit the purchaser to clear customs. An Army or Air Force Post Office () or Department of State pouch address can be too slow for documentation to arrive before the ship does. The should ensure that the U.S. communication routing identifier (COMMRI) or message address is listed as the 4 address in the or that a reliable office email address for the U.S. is listed in the special instructions. This message or email address will be used for electronic notification of REPSHIPS. The 5 and 6 addresses should reflect the mailing address of the U.S. .

should contact whenever ocean delivery of cargo is anticipated. At a minimum, the following information should be provided: name, email address, telephone number, , and any other information the might have about the shipment [SAMM ].

Under 4500.9-R Part II, Chapter 205, the shipping activity shall transmit a REPSHIP to the consignee before releasing sensitive items, or conventional . This will be a message sent to the 4 address or the ’s email address in the . For REPSHIP purposes, the in-country USMILREP is the consignee addressee for materiel deliveries. The USMILREP will use the REPSHIP to coordinate pickup or onward movement of the shipment with personnel [].

For Special Assignment Airlift Missions () and channels, the aerial prepares a manifest for each aircraft on the mission, listing all the materiel loaded on it, and the manifest travels with the aircraft. The should stay in contact with the aerial that serves the country or the , so that it knows of upcoming missions. The U.S. Transportation Command's Integrated Data Environment/Global Transportation Network Convergence () and can each produce an itemized list of the cargo being shipped [SAMM ].

Shipping addresses

It is strongly recommended that each ensure that its assigned meet with the purchaser’s point of contact not less than annually to review all addresses [SAMM ]. The is also responsible for identifying the appropriate shipping destination codes for Building Partner Capacity () shipments prior to case implementation [SAMM ].

Correct addresses are essential for routing cargo and documentation accurately, and they also make sure the purchaser is charged the correct transportation rate. Each purchaser is responsible for keeping its addresses current and its contact information accurate [SAMM ]. The review should validate each existing address and its content and find the addresses that are no longer valid. Its findings need to go to each , so that addresses no longer required are deleted and existing ones are updated as required [SAMM ].

When the purchaser changes freight forwarders, it is responsible for updating its listing in the through the focal point and for reconciling the shipments its former forwarder received [SAMM ]. If the is not updated, the purchaser may face storage charges at the former forwarder's facility or at a DoW vendor's facility [SAMM ].

References

SAMM

Public authorities

  • DTR 4500.9-R: Defense Transportation Regulation, DTR 4500.9-R

Related