Guide
How are arms, ammunition and explosives shipped in a Foreign Military Sale?
Sensitive arms, ammunition and explosives move through the : Security Risk Category I items, such as man-portable air defense missiles, at least to the purchaser's unless a waiver is granted, and Categories II through IV at least through a port controlled by the Department of War, a rule that cannot be waived. Items that are not sensitive but contain explosives follow the hazardous materials rules and may move through commercial channels. Canada arranges its own shipments of every category.
How are arms, ammunition and explosives shipped in a Foreign Military Sale?
Arms, ammunition and explosives and other sensitive items may not be shipped to a purchaser's or to the purchaser's facility in the United States, and they require Transportation Plans [SAMM ]. and shipments to Canada are exceptions to the forwarder and facility rule [SAMM , ]. Security Risk Category I items must move by the at least to the overseas unless the purchaser obtains a waiver. Categories II to IV must move through a that the Department of War controls, and that requirement cannot be waived [SAMM , ].
What makes a shipment sensitive
The term “sensitive” has two different meanings, but both definitions impact the movement of materiel deemed “sensitive.” “” is a description usually associated with Arms, Ammunition, and Explosives (), but also includes non-explosive technologies in Night Vision Devices () and .
In the context of security, “sensitive” is a special term that describes conventional , , and requiring special protection and security to keep them out of the hands of criminals and terrorists.
Criminals and terrorists find conventional , , and desirable because they are deadly, portable, and highly pilferable if unprotected. Conventional are munitions that are not nuclear, biological, or chemical (NBC) munitions. NBC items are covered by their own regulations. The Department of War (DoW) applies special security controls to sensitive items. Sensitive explosive materiel moves through the under security procedures consistent with Delivery Term Codes () 7, 8 or 9 [SAMM , ].
The second definition of the term “sensitive” applies in the context of hazardous materials, specifically explosives. “Sensitive” in this context indicates the ease of initiation of fire or explosion within the package and the extent of the damage it causes. Hazardous materiel regulations categorize explosives based on their volatility or ease of detonation.
Sensitive is defined and controlled under Manual 5100.76 and identified by its Security Risk Category, which Federal Catalog products carry; because a catalog entry can be wrong, a materiel manager may override it. The Defense Transportation Regulation sets out how the Security Risk Category correlates with the Controlled Inventory Item Code () in the item's catalog data [].
Not all items are sensitive. That means they do not require special security [SAMM ]. Non-sensitive , if it contains explosives, is governed by hazardous materials () regulations [SAMM ]. Just because an item is hazardous does not make it sensitive , or vice-versa. Hazardous items that are not sensitive often move through commercial channels under 4 or 5.
Only items that DoW item managers identify as sensitive under Manual 5100.76 require special release and movement processing [SAMM ].
Security Risk Categories
Sensitive falls into four Security Risk Categories (), and each category carries its own transportation procedures. such as may have no but still requires special handling. The case manager must note in the any item that contains or or is classified or sensitive [SAMM ].
The United Nations’ () hazard classification system for identifying explosive materials and explosive components is recognized internationally and is used universally by the DoW and the U.S. Department of Transportation (). The system consists of nine classes of dangerous materials, with explosives designated as Class 1. The explosives hazard class is further subdivided into six divisions, which are used for segregating ammunition and explosives on the basis of similarity of characteristics, properties, and accident effects potential.
Ammunition and explosives are further assigned to compatibility groups, which identify whether the explosives can be transported and stored together without significantly increasing either the probability of an incident or the magnitude of the effects of such an incident. The compatibility group determines the type of carrier that may be used to transport the materiel, such as a passenger aircraft or a dedicated ammunition surface ship.
Each carries its own transportation procedures [SAMM ].
I materiel must be transported to at least a customer country’s by the unless the Under Secretary of War for Intelligence and Security grants a waiver. The applicable on the will be 9 or 7 [SAMM , ]. II through IV items must move through a DoW-controlled ocean or aerial [SAMM ].
Security Risk Category I consists mainly of Man Portable Air Defense Systems (), rockets, and ammunition configured ready to fire, components included. These items must be moved by the to at least the overseas . A purchaser that wants to pick them up at a DoW-controlled port and move them overseas under its own control must request a waiver from the Under Secretary of War for Intelligence and Security, through the , at its Execution Policy and Analysis Directorate (SPP/EPA) in the Office of Strategy, Plans, and Policy. The request must show that the security the purchaser will provide for the movement is at least equal to DoW standards; Manual 5100.76 provides a sample [SAMM ].
A purchaser should send its waiver request through the to (SPP/EPA). coordinates the review of each request with the Under Secretary and returns the final determination to the purchaser once the review is complete. If the waiver is granted, its information must be added to the applicable as a note [SAMM ].
Security Risk Categories II through IV together cover the range from light automatic weapons and ammunition down to non-automatic weapons and ammunition. They must move through a DoW-controlled and keep security procedures consistent with 7, 8 or 9, a requirement that cannot be waived. (SPP/EPA) is the office to consult for clarification of any requirement [SAMM ].
Freight forwarders and Canada
and moving through the must comply with the Defense Transportation Regulation () 4500.9-R, Part II, Chapter 205. and sensitive items may not go to the purchaser’s [SAMM ]. may move through an if in-transit visibility and reasonable protection against theft and loss are maintained [SAMM ]. A still coordinates the customer’s pickup at a DoW-controlled port and processes the export paperwork.
Under each country’s national law, moving designated as hazardous materiel, whether through the or commercial channels, needs the approval of the national agency that regulates hazardous materials transportation. For the U.S., the “competent authority” (CA) is the . A Competent Authority Approval (CAA) classification of explosives letter specifies international hazard classification, proper shipping name, packaging, and other requirements for the item and assigns an “explosive hazard” (EX) number. For controlled by the DoW, the delegates this responsibility to specific DoW components. These organizations propose and submit Final Hazard Classifications () via the Explosives Safety Board (DDESB) for approval, through the U.S. Army Transportation Command () to for issuing a Classification of Explosives approval. An Interim Hazard Classification (IHC) is a mechanism used by the DoW to allow for the transportation of class 1 materiel in the U.S. when the item’s final hazard classification process has not been completed. The IHC is a memorandum, signed by authorized personnel within the Army, Navy, and Air Force, describing the item and giving it a temporary hazard classification.
The Joint Hazard Classification System () is the official DoW database of final hazard classification data for the military services’ ammunition and explosives. It is maintained by the U.S. Army Technical Center for Explosives Safety (USATCES). Explosive items are evaluated and tri-service coordinated between hazard classifiers for the Army, Navy, and Air Force following procedures in TB 700-2/NAVSEAINST 8020.8B/TO 11A-1-47/DLAR 8220.1, Department of Defense Ammunition and Explosives Hazard Classification System. The DDESB publishes changes to hazard classification procedures. Approved items are added to the database after assignment of an EX-Number by the and are published for use by authorized customers on a need-to-know basis.
When explosives are moved under an agreement, the DoW EX-Number can be used to move the explosives within and from the , provided that the explosives are in the DoW’s possession via the [SAMM ]. If the DoW moves the explosive materiel to an overseas ( 9) or to the final destination ( 7), the DoW EX-Number is valid to transport the materiel to that location [SAMM ]. When the purchaser elects to pick up materiel at a DoW-controlled port ( 8) using its own carrier, the purchaser may use the DoW EX-Number only while the materiel remains in U.S. territorial jurisdiction, and never for any movement outside the United States [SAMM ]. However, if the purchaser elects to pick up materiel at the point of origin using their own arranged transportation, the customer must have a country-specific EX-Number issued by the to the purchaser’s CA to allow the explosive materiel to move within and from after the physical transfer of custody from the DoW to the purchaser [SAMM , ]. Where the explosive materiel, in the customer’s possession, transits a third country during the initial export, the customer obtains a CAA from the CA of each country it transits, under that country’s national law.
When an customer needs to import into the U.S. (for , testing, training exercises at a U.S. installation, etc.), hazard classification documentation for the , regardless of origin, must come from the customer’s CA [SAMM ]. If a DoW EX-Number was originally used to export U.S. origin , it cannot be reused for any subsequent transportation [SAMM ]. The purchaser’s national CA must apply for a country-specific EX-Number from the before the materiel can be moved back to, within, or from the United States [SAMM ]. The purpose of the application from the customer’s national CA is to certify that the customer has not altered the content or packaging of the explosive materiel while it has been in its possession and that it is compliant with U.N. safety standards.
The is responsible for providing the purchaser the documentation it cannot obtain itself, such as the existing EX-Number, the record printout and packaging documentation [SAMM , ].
Canada may have and sensitive items of every category shipped directly to locations in Canada. Canada has no freight forwarders; it arranges its shipments directly with North American carriers [SAMM ].
References
SAMM
- SAMM C7.15: Transportation of Arms, Ammunition and Explosives and Sensitive Materiel.
- SAMM C7.15.4: Controlled Cryptographic Item.
- SAMM C7.16: Movements of Explosive Materiel by Commercial Conveyance.
- SAMM C9.T4A: Table of Delivery Term Codes and Percentage
- SAMM C7.16.2: Use of Department of War EX-Numbers for export of Foreign Military Sales -origin articles from the United States.
- SAMM C7.16.2.1
- SAMM C7.16.2.2
- SAMM C7.16.3: EX-Numbers issued to Foreign Military Sales Purchasers.
- SAMM C7.16.4.1.1: Unmodified Foreign Military Sales Articles.
- SAMM C7.16.4: Securing EX-Numbers from the U.S. Department of Transportation.
- SAMM C7.15.3: Non-Sensitive Arms, Ammunition, & Explosives.
- SAMM C7.15.1: Security Risk Category I.
- SAMM C7.15.2: Security Risk Category II through IV.
- SAMM C7.15.5: Arms, Ammunition, & Explosives and Sensitive to Canada.
Public authorities
- DTR 4500.9-R: Defense Transportation Regulation, DTR 4500.9-R
Related
Defense Transportation System (DTS)
The part of the worldwide transportation infrastructure that supports Department of War transportation needs in peace and war, made up of military (organic) and commercial resources that are organic to the Department, under contract to it or controlled by it [SAMM C7.6.1].
It takes in organic and commercial aircraft and ships, commercial small-package services under Department contract, and U.S. military air and ocean terminals in and outside the United States.
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Port of Debarkation (POD)
A military or commercial air or ocean port at which materiel is offloaded. Also referred to as the Port of Discharge.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Freight Forwarder
A commercial import/export company registered with the Department of State, Bureau of Political-Military Affairs, Directorate of Defense Trade Controls and under contract to the Foreign Military Sales customer which arranges transportation of materiel from a point specified in the Letter of Offer and Acceptance to the final destination.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Controlled Cryptographic Items (CCI)
CCIs are devices that embody cryptographic logic or other cryptographic design, but do not perform the entire Communications Security (COMSEC) function. CCIs are dependent upon host equipment or assemblies to complete and operate COMSEC functions. Un-keyed CCI is unclassified. An item may be designated CCI because its entire component is controlled (e.g. Inline Network Encryptor (INE)), or because the item contains an embedded cryptographic National Security Agency (NSA) Type-1 certified module to encrypt/de-encrypt information (e.g. secure radio).
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Port of Embarkation (POE)
A military or commercial air or ocean port at which a carrier begins the journey to deliver materiel to the consignee. This is also referred to as the Port of Exit.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Sensitive Materiel
Volatile and dangerous explosives which require special handling and transportation arrangements. The term sensitive also applies to highly desirable selected technologies which are not explosive, but which require special security procedures for transportation.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
CCI: Controlled Cryptographic Item
SAMM Acronyms, as of 12 September 2026
DTC: Delivery Term Code
SAMM Acronyms, as of 12 September 2026
CIIC: Controlled Inventory Item Code
Letter of Offer and Acceptance (LOA)
The legal instrument that lists the defense articles and services, including training, that the U.S. Government transfers to a foreign country or international organization, with their estimated costs and the terms and conditions. The benefitting partner does not sign a Building Partner Capacity (BPC) LOA.
The Letter of Offer and Acceptance (LOA) is the instrument the U.S. Government uses to sell under the Arms Export Control Act (AECA); signed LOAs and their later Amendments and Modifications are also called Foreign Military Sales (FMS) cases [SAMM C5.6.1].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
USDOT: U.S. Department of Transportation
DTS: Defense Transportation System
SAMM Acronyms, as of 12 September 2026
LOA: Letter of Offer and Acceptance
SAMM Acronyms, as of 12 September 2026
Defense Security Cooperation Agency (DSCA)
The Department of War agency that directs, administers and provides guidance to the Department's components and its representatives at U.S. missions for the execution of the security cooperation programs for which it is responsible [SAMM C1.3.2.2]. The agency also provides financial and technical assistance, arranges the transfer of defense materiel, training and services to international partners, and promotes military-to-military contacts.
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Implementing Agency (IA)
The military department or defense agency responsible for the execution of military assistance programs. With respect to FMS, the military department or defense agency assigned responsibility by the Defense Security Cooperation Agency to prepare an LOA and to implement an FMS case. The implementing agency is responsible for the overall management of the actions that will result in delivery of the materials or services set forth in the LOA that was accepted by a foreign country or international organization.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
DSCA: Defense Security Cooperation Agency
SAMM Acronyms, as of 12 September 2026
Glossary entry →Defense Security Cooperation Agency (DSCA) →
Foreign Military Sales (FMS)
The part of U.S. security assistance, authorized by the Arms Export Control Act (AECA), in which eligible foreign governments and international organizations buy defense articles, services and training from the U.S. Government under formal government-to-government agreements.
The articles come either from Department of War stocks or from new procurement under contracts the Department manages [22 U.S.C. 2761, 22 U.S.C. 2762]. A sale is FMS whatever the source of the purchaser's financing.
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
FMS: Foreign Military Sale
SAMM Acronyms, as of 12 September 2026
FHC: Final Hazard Classification
U.S. Army Transportation Command
The U.S. Army command, formerly the Military Surface Deployment and Distribution Command (SDDC), that is the Army service component command of U.S. Transportation Command (USTRANSCOM) and a major subordinate command of Army Materiel Command.
Its assets form part of the Defense Transportation System (DTS), and it processes claims against ocean carriers for transportation the Department of War furnishes or contracts [SAMM C7.6.2.1, C7.21.2].
FMS Edge glossary, as of 10 October 2026
Continental United States (CONUS)
U.S. territory, including the adjacent territorial waters, located within the North American continent between Canada and Mexico. Does not include Hawaii or Alaska.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
CONUS: Continental United States
SAMM Acronyms, as of 12 September 2026
Repair and Return
A service where eligible foreign countries return unserviceable repairable items for entry into the U.S. Military Department repair cycle. Upon completion of repairs, the same item is returned to the country and the actual cost of the repair is billed to the country.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
SAMM C7.15: Transportation of Arms, Ammunition and Explosives and Sensitive Materiel.
“Arms, Ammunition, & Explosives (AA&E) and Sensitive materiel include items such as small arms, various types of ammunition, explosives, and special items, such as night vision devices and Controlled Cryptographic Items (CCI), that pose special concern if they fall into the wrong hands. AA&E materiel is broken down into four Security Risk Categories (SRC). Sensitive materiel, to include CCI, may …”
Security Assistance Management Manual, as of 26 October 2026
SAMM C7.15.4: Controlled Cryptographic Item.
“CCI recipients are permitted to move CCI (to include external peripheral/support equipment) through FMS freight forwarders or the DTS, provided that in-transit visibility and reasonable protection against theft and loss is maintained at all times. See Figure C7.F4. The FMS purchaser may impose more stringent controls on shipment of CCI when transporting outside the United States.”
Security Assistance Management Manual, as of 11 September 2026
SAMM C7.15.5: Arms, Ammunition, & Explosives and Sensitive to Canada.
“Canada may have shipments of all categories of AA&E and Sensitive items moved directly to locations in Canada. Canada has no freight forwarders and arranges shipments directly with North American carriers.”
Security Assistance Management Manual, as of 11 September 2026
SAMM C7.15.1: Security Risk Category I.
“This category is primarily Man Portable Air Defense Systems (MANPADS), rockets, and ammunition in a ready-to-fire configuration, including components. These items must be moved by DTS to at least the overseas Port of Debarkation (POD). If a purchaser wants to pick up the articles at a DoW-controlled port for overseas movement under its own control, the purchaser must request a …”
Security Assistance Management Manual, as of 26 October 2026
SAMM C7.15.2: Security Risk Category II through IV.
“Collectively, these categories include everything from light automatic weapons and ammunition to non-automatic weapons and ammunition. These items must move through a DoW-controlled Port of Embarkation (POE) and maintain security procedures consistent with Delivery Term Code (DTC) 7, 8, or 9. This requirement cannot be waived. Please consult DSCA (SPP/EPA) for clarification of any requirements.”
Security Assistance Management Manual, as of 26 October 2026
SAMM C7.15.3: Non-Sensitive Arms, Ammunition, & Explosives.
“Not all ammunition and weapons-related items are Sensitive AA&E. Only items identified by DoW item managers as Sensitive in accordance with DoDM 5100.76 require special release and movement processing.”
Security Assistance Management Manual, as of 26 October 2026
SAMM C7.16: Movements of Explosive Materiel by Commercial Conveyance.
“Shipments of hazardous materials (HAZMAT) must comply with the applicable provisions of 49 C.F.R. Subchapter C “U.S. Hazardous Materials Regulations (HMR),” and international transportation standards. The U.S. Department of Transportation’s Pipeline and Hazardous Materials Safety Administration (DOT/PHMSA) regulates commercial conveyance of HAZMAT in the U.S. DOT/PMHSA issues authorizations, known as EX-Numbers, which are required for commercial conveyance of all HAZMAT …”
Security Assistance Management Manual, as of 26 October 2026
SAMM C9.T4A: Table of Delivery Term Codes and Percentage
“Table C9.T4A. Table of Delivery Term Codes and Percentage Percentages to be used when Shipping from: # Delivery Term Codes Defense Working Capital Fund Other than Defense Working Capital Fund 2 a) Inland origin to inland destination within the continental United States (CONUS)/Canada (except Newfoundland and Labrador) 0.00% 2.75% b) Inland origin to inland destination within a foreign country other …”
Security Assistance Management Manual, as of 5 October 2026
SAMM C7.16.2: Use of Department of War EX-Numbers for export of Foreign Military Sales -origin articles from the United States.
“DOT/PHMSA issues DoW-specific EX-Numbers for movement of DoW HC1 articles. The DoW EX-Number may be used for the initial export of Foreign Military Sales (FMS)-origin HC1 articles from the United States if the materiel is moving through the DTS to the destination. Otherwise, FMS purchasers are responsible for obtaining appropriate EX Numbers.”
Security Assistance Management Manual, as of 26 October 2026
SAMM C7.16.2.1
“FMS-origin HC1 articles being moved by the Defense Transportation System (DTS) to the purchaser’s country (Delivery Term Code (DTC) 7 and 9) may use the DoW EX-Number. Once custody of the materiel is transferred to the purchaser, the DoW EX-Number is no longer valid for the movement of FMS-origin HC1 articles.”
Security Assistance Management Manual, as of 26 October 2026
SAMM C7.16.2.2
“The DoW EX-Number may be used for the FMS purchaser pick-up of HC1 at a DoW-controlled Port of Embarkation (POE) (DTC 8). The use of the DoW EX-Number by the purchaser is valid only while the materiel remains in U.S. territorial jurisdiction. DoW EX Numbers cannot be used for any subsequent movement outside of the United States.”
Security Assistance Management Manual, as of 26 October 2026
SAMM C7.16.3: EX-Numbers issued to Foreign Military Sales Purchasers.
“Any commercial movement by the purchaser or its FMS freight forwarder of FMS HC1 materiel within the United States or the return of any HC1 materiel to the United States for any reason, such as repair, modification, upgrade, testing, or training exercises, requires that the purchaser first apply to DOT/PHMSA for an EX-Number following the process detailed under Section C7.16.4. …”
Security Assistance Management Manual, as of 26 October 2026
SAMM C7.16.4.1.1: Unmodified Foreign Military Sales Articles.
“A new EX-Number must be obtained by the FMS purchaser prior to any commercial transport in the United States of FMS articles containing HC1 that remain in the original configuration with no modifications. The following documentation, all in English, is required to be submitted to DOT/PMHSA by an official of the purchaser’s government: Figure C7.F5. Hazard Class1 EX-Number Documentation Hazzard …”
Security Assistance Management Manual, as of 5 November 2026
SAMM C7.16.4: Securing EX-Numbers from the U.S. Department of Transportation.
“Purchasers must apply for a DOT/PMHSA-issued EX-Number for each HC1 article if the materiel is expected to return to the United States for any reason. An application should be filed for each HC1 article, or groups of articles that have the same UN identification number, hazard classification, and packaging instructions, rather than on a per-shipment basis. The length of time …”
Security Assistance Management Manual, as of 26 October 2026