Guide
Who is responsible for shipping in a Foreign Military Sale?
Under Section 5 of the standard terms, title passes to the purchaser at the initial point of shipment, even when the U.S. Government arranges onward transport. The purchaser furnishes shipping instructions, insures the shipment, clears customs, and reports shortages, damage and other discrepancies to the U.S. Government on a within the time limits the terms set. Loss or damage caused by a carrier is claimed against the carrier instead.
The Offer Release Code on each LOA line says how the shipping activity releases materiel. X marks movement via the Defense Transportation System or special shipping instructions; otherwise A releases without notice, Y releases if a Notice of Availability goes unanswered, and Z holds the shipment until the notice is answered.
Who is responsible for shipping in a Foreign Military Sale?
The on each line shows how far, from the source of supply toward the final destination, the Department of War (DoW) is responsible for transporting a shipment [SAMM ].
Section 5 delineates the transportation obligations and requirements of the international partner, defines the role of the U.S. Government () in arranging for transportation, and describes the process for submitting discrepancy claims to the [SAMM ].
5.1 Title transfer and delivery point
5.1 The agrees to deliver and pass title to the Purchaser at the initial point of shipment unless otherwise specified in this . With respect to items procured for sale to the Purchaser, this will normally be at the manufacturer’s loading facility; with respect to items furnished from stocks, this will normally be at the U.S. depot. Articles will be packed, crated, or otherwise prepared for shipment prior to the time title passes. If “Point of Delivery” is specified other than the initial point of shipment, the supplying U.S. Department or Agency will arrange movement of the articles to the authorized delivery point as a reimbursable service but will pass title at the initial point of shipment. The disclaims any liability for damage or loss to the items incurred after passage of title irrespective of whether transportation is by common carrier or by the U.S. [SAMM ].
Section 5.1 identifies where title transfers and delivery occur. Title represents ownership. This condition states that the international partner becomes the owner of materiel at the initial shipping point [SAMM ]. Delivery, in this context, does not mean the materiel has arrived at the final international partner’s destination. Delivery refers to the point where transportation responsibility transfers from the to the international partner. The applied to each line will indicate where the international partner becomes responsible for transportation. Under certain delivery term codes, the may arrange for transportation in various increments up to and including movement to an inland location within the international partner’s country [SAMM , ]. Regardless of when the international partner assumes transportation responsibility, the title will still transfer at the initial shipping point. This means that the will not be financially liable for items damaged in transit, even if arranges or provides the transportation [SAMM ].
This condition should not be interpreted to mean that the international partner’s financial liability does not begin until title transfer. Financial liability begins to accrue as soon as the starts work on the case, well before title passes. In Section 3, the international partner agrees to indemnify the and its contractors. Additionally, in Section 2, the international partner agrees to be liable for termination costs if they elect to delete items or to cancel the case [SAMM ].
5.2 Shipping instructions
5.2 The Purchaser agrees to furnish shipping instructions which include Mark For and Codes based on the Offer Release Code [SAMM ].
Section 5.2 describes the international partner’s obligation to provide the required transportation information so that items are shipped through the appropriate channels to arrive at the correct international partner’s destination [SAMM ].
The Offer Release Code on each line tells the shipping activity when it may release the item. Under Code A it releases the shipment automatically, without advance notice. Under Code Y it sends a first and releases the shipment automatically if no response arrives within 15 calendar days. Under Code Z it sends an and cannot release the shipment until the addressee responds. Code X shows that the materiel will move by the , or under special shipping instructions [SAMM ].
The code identifies the commercial freight company employed by the international partner to accomplish overseas transportation. The mark-for code identifies the ultimate in-country destination address.
5.3 Insurance and export licenses
5.3 The Purchaser is responsible for obtaining insurance coverage and customs clearances. Except for articles exported by the , the Purchaser is responsible for ensuring that export licenses are obtained prior to export of U.S. defense articles. The incurs no liability if export licenses are not granted or they are withdrawn before items are exported [SAMM ].
Given the fact that the international partner bears the risk of any damage that may occur during shipment, the international partner is responsible for obtaining any desired insurance coverage [SAMM ]. Additionally, the international partner is responsible for completing the necessary documents to clear customs [SAMM , ].
5.4 Delivery documents and claims
5.4 The Purchaser agrees to accept DD Forms 645 or other delivery documents as evidence that title has passed and items have been delivered. Title to defense articles transported by parcel post passes to the Purchaser at the time of parcel post shipment. Standard Form 364 () will be used in submitting claims to the for overage, shortage, damage, duplicate billing, item deficiency, improper identification, improper documentation, or non-shipment of defense articles and non-performance of defense services. The Standard Form 364 will be submitted promptly by the Purchaser. The will disallow any claim, including a claim for shortage or nonperformance, received more than 1 year after delivery or more than 1 year after passage of title to the defense articles, whichever comes first, or received more than 1 year after the end of the scheduled period of performance for defense services, unless the determines that unusual and compelling circumstances involving latent defects justify consideration of the claim. Claims for non-shipment or non-receipt of an entire lot will be disallowed by the if such claims are received more than 1 year after the scheduled delivery date or initial billing, whichever is later. The Purchaser agrees to return discrepant articles to the ’s custody promptly in accordance with any direction provided by the . The Purchaser may submit for documentation purposes regardless of the dollar value, but only valued at $200 or more will be reviewed for possible compensation regardless of the type of discrepancy. This minimum value includes the value of the item plus any transportation and handling costs [SAMM ].
Section 5.4 delineates the international partner’s obligation to accept certain documentation as evidence that title transfer and delivery have occurred. Additionally, this section outlines the process and conditions under which the international partner can submit claims for discrepancies. The international partner has an avenue to request reimbursement for shipping or billing discrepancies. This process is called supply discrepancy reporting [SAMM , ].
The parties to a shipment
Table C7.T1 sets out the transportation responsibilities of eleven organizations. Besides the purchaser and, if one is involved, its , they are the Under Secretary of War for Acquisition and Sustainment, the , the Defense Counterintelligence and Security Agency, the U.S. Transportation Command, the Combatant Commands, the Implementing Agencies, the Defense Logistics Agency, the and the Maritime Administration [SAMM ].
References
SAMM
- SAMM C5.F9: Letter of Offer and Acceptance Standard Terms and Conditions
- SAMM C9.T4A: Table of Delivery Term Codes and Percentage
- SAMM C7.4.1: Delivery Term Code.
- SAMM C7.T6: Offer Release Codes
- SAMM C3.3.3.2: Overseas Customs Clearance Requirements for Department of War-Sponsored Shipments.
- SAMM C3.3.3.4.3: Overseas Customs Clearance Requirements for Purchaser-Sponsored Shipments.
- SAMM C6.4.10: Supply Discrepancies.
- SAMM C7.T1: Transportation Responsibilities
- SAMM C5.6.5.4.1: Standard Terms and Conditions and Letter of Offer and Acceptance Information.
Facts referenced
- Calendar days a shipping activity waits for a response to a Notice of Availability under Offer Release Code Y before releasing the shipment automatically (Table C7.T6): 15 calendar days (as of 11 September 2026; SAMM C7.T6)
Related
Letter of Offer and Acceptance (LOA)
The legal instrument that lists the defense articles and services, including training, that the U.S. Government transfers to a foreign country or international organization, with their estimated costs and the terms and conditions. The benefitting partner does not sign a Building Partner Capacity (BPC) LOA.
The Letter of Offer and Acceptance (LOA) is the instrument the U.S. Government uses to sell under the Arms Export Control Act (AECA); signed LOAs and their later Amendments and Modifications are also called Foreign Military Sales (FMS) cases [SAMM C5.6.1].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Supply Discrepancy Report (SDR)
A process for international customers to file a complaint with the DoD for product loss, quality deficiencies, damage, and various other problems associated with the delivery of material under the Foreign Military Sales program.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Delivery Term Code (DTC)
A single-character logistics code that shows how far, from the source of supply to the final destination, the Department of War is responsible for transporting a shipment; it does not set the mode of transportation or how the movement is financed [SAMM C7.4.1].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
LOA: Letter of Offer and Acceptance
SAMM Acronyms, as of 12 September 2026
Defense Transportation System (DTS)
The part of the worldwide transportation infrastructure that supports Department of War transportation needs in peace and war, made up of military (organic) and commercial resources that are organic to the Department, under contract to it or controlled by it [SAMM C7.6.1].
It takes in organic and commercial aircraft and ships, commercial small-package services under Department contract, and U.S. military air and ocean terminals in and outside the United States.
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
DTC: Delivery Term Code
SAMM Acronyms, as of 12 September 2026
Letter of Request (LOR)
The term used to identify a request from an eligible FMS participant country for the purchase of U.S. defense articles and services. The request may be in message or letter format.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Continental United States (CONUS)
U.S. territory, including the adjacent territorial waters, located within the North American continent between Canada and Mexico. Does not include Hawaii or Alaska.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
CONUS: Continental United States
SAMM Acronyms, as of 12 September 2026
Freight Forwarder
A commercial import/export company registered with the Department of State, Bureau of Political-Military Affairs, Directorate of Defense Trade Controls and under contract to the Foreign Military Sales customer which arranges transportation of materiel from a point specified in the Letter of Offer and Acceptance to the final destination.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Notice of Availability (NOA)
Notice, on DD Form 1348-5, from a shipping activity to a Foreign Military Sales (FMS) purchaser or its freight forwarder that materiel is ready for shipment, in time for the recipient to prepare for receipt and respond with delivery instructions.
The Notice of Availability (NOA) goes to the appropriate address in the Military Assistance Program Address Directory (MAPAD) and coordinates the release of materiel requiring special receipt, export processing or special storage procedures [SAMM C7.11.1].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
NOA: Notice of Availability
SAMM Acronyms, as of 12 September 2026
SDR: Supply Discrepancy Report
SAMM Acronyms, as of 12 September 2026
Defense Security Cooperation Agency (DSCA)
The Department of War agency that directs, administers and provides guidance to the Department's components and its representatives at U.S. missions for the execution of the security cooperation programs for which it is responsible [SAMM C1.3.2.2]. The agency also provides financial and technical assistance, arranges the transfer of defense materiel, training and services to international partners, and promotes military-to-military contacts.
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Defense Contract Management Agency (DCMA)
An agency under the direction of the Under Secretary of Defense for Acquisition and Sustainment, which provides contract administration services for the Department of Defense, other federal organizations and international partners, and is an essential part of the acquisition process from pre-award to sustainment and contract closeout.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
SAMM C7.4.1: Delivery Term Code.
“The Delivery Term Code (DTC) is a logistical code that indicates how far, from the source of supply to the final destination, that the DoW is responsible to transport a shipment. The DTC does not determine the mode of transportation or how it is financed. A purchaser may specify a preferred DTC in the Letter of Request (LOR). See Table …”
Security Assistance Management Manual, as of 26 October 2026
SAMM C5.F9: Letter of Offer and Acceptance Standard Terms and Conditions
“… Standard Form 364 (Supply Discrepancy Report (SDR)) will be used in submitting claims to the USG for”
Security Assistance Management Manual, as of 11 September 2026
SAMM C5.F9: Letter of Offer and Acceptance Standard Terms and Conditions
“… 5.1. The USG agrees to deliver and pass title to the Purchaser at the initial point of shipment unless otherwise specified in this LOA. With respect to items procured for sale to the Purchaser, this will normally be at the manufacturer's loading facility; with respect to items furnished from USG stocks, this will normally be at the U.S. depot. Articles …”
Security Assistance Management Manual, as of 11 September 2026
SAMM C9.T4A: Table of Delivery Term Codes and Percentage
“Table C9.T4A. Table of Delivery Term Codes and Percentage Percentages to be used when Shipping from: # Delivery Term Codes Defense Working Capital Fund Other than Defense Working Capital Fund 2 a) Inland origin to inland destination within the continental United States (CONUS)/Canada (except Newfoundland and Labrador) 0.00% 2.75% b) Inland origin to inland destination within a foreign country other …”
Security Assistance Management Manual, as of 5 October 2026
SAMM C5.F9: Letter of Offer and Acceptance Standard Terms and Conditions
“… 2.1. The Purchaser may cancel this LOA or delete items at any time prior to delivery of defense articles or performance of defense services. The Purchaser is responsible for all costs resulting from cancellation under this section.”
Security Assistance Management Manual, as of 11 September 2026
SAMM C5.F9: Letter of Offer and Acceptance Standard Terms and Conditions
“… 5.2. The Purchaser agrees to furnish shipping instructions which include Mark For and Freight Forwarder Codes based on the Offer Release Code.”
Security Assistance Management Manual, as of 11 September 2026
SAMM C7.T6: Offer Release Codes
“Table C7.T6. Offer Release Codes Code Explanation A Shipments are to be released automatically by the shipping activity without advance notice. Note that this code is not to be used if the materiel is oversize, overweight, hazardous, perishable, pilferable, classified, or requires any special handling. X Materiel with an ORC X must have a corresponding X in MILSTRIP record position …”
Security Assistance Management Manual, as of 11 September 2026
SAMM C5.F9: Letter of Offer and Acceptance Standard Terms and Conditions
“… 5.3. The Purchaser is responsible for obtaining insurance coverage and customs clearances. Except for articles exported by the USG, the Purchaser is responsible for ensuring that export licenses are obtained prior to export of U.S. defense articles. The USG incurs no liability if export licenses are not granted or they are withdrawn before items are exported.”
Security Assistance Management Manual, as of 11 September 2026
SAMM C3.3.3.2: Overseas Customs Clearance Requirements for Department of War-Sponsored Shipments.
“The purchaser is responsible for obtaining overseas customs clearances and for all actions and costs associated with customs clearances for deliveries of FMS materiel using DTS, including any intermediate stops or transfer points.”
Security Assistance Management Manual, as of 5 October 2026
SAMM C3.3.3.4.3: Overseas Customs Clearance Requirements for Purchaser-Sponsored Shipments.
“The purchaser is responsible for all actions and costs associated with obtaining overseas customs clearances for deliveries of FMS materiel to a purchaser's port of discharge (including delivery to third countries) using commercial means.”
Security Assistance Management Manual, as of 5 October 2026
SAMM C5.F9: Letter of Offer and Acceptance Standard Terms and Conditions
“… 5.4. The Purchaser agrees to accept DD Forms 645 or other delivery documents as evidence that title has passed and items have been delivered. Title to defense articles transported by parcel post passes to the Purchaser at the time of parcel post shipment. Standard Form 364 (Supply Discrepancy Report (SDR)) will be used in submitting claims to the USG for”
Security Assistance Management Manual, as of 11 September 2026
SAMM C6.4.10: Supply Discrepancies.
“The USG makes every effort to provide the correct defense article or service in the quantity and quality shown in the LOA. In the event of a discrepancy, the purchaser submits an SDR using Standard Form (SF) 364. Instructions for SF 364 completion, DoW processing timeframes, and responsibilities are located in the Defense Logistics Management (DLM) 4000.25, Defense Logistics Management …”
Security Assistance Management Manual, as of 26 October 2026
SAMM C7.T1: Transportation Responsibilities
“Table C7.T1. Transportation Responsibilities Organization Responsibility Under Secretary of War for Acquisition and Sustainment (USW(A&S), Deputy Assistant Secretary of War for Logistics (DASW(LOG)), Transportation Directorate Sets policy for the movement of materiel. Defense Security Cooperation Agency Ensures that Foreign Military Sales (FMS) transportation policies are kept current; issues revised policy as needed. Interprets transportation policy as requested; requests clarification as …”
Security Assistance Management Manual, as of 26 October 2026