Guide
What rules govern the transfer of U.S. defense technology to another country?
The , 13526 and National Security Decision Memorandum 119 set the rules for transferring U.S. defense technology to a foreign government, and DoDI 2040.02 sets Department of War policy for applying them. A recipient must agree not to transfer the articles or data without U.S. consent, not to use them for other purposes, and to protect them as the United States would; every carries those conditions. Classified military information is released only when the release benefits the United States, and every international transfer, classified or not, is subject to U.S. export control.
Department of War policy on international transfers
The primary Department of War (DoW) policy governing the process of technology transfer is contained in DoDI 2040.02, International Transfers of Technology, Articles, and Services. This instruction establishes DoW policy, assigns responsibilities, and prescribes procedures for the international transfer of dual-use and defense-related technology, articles, and services. It applies to all transfer mechanisms and will be implemented through such processes as export licensing; (including ); transfers of DoW personal property to parties outside of DoW control; and any DoW Research, Development, and Acquisition () activities, including international agreements. It outlines working relationships among the Joint Staff, the Military Departments, and the various Defense Agencies.
DoDI 2040.02 requires the DoW to protect dual-use and defense-related technology as a valuable national security resource and to transfer it only in pursuit of national security and foreign policy objectives. When it applies export control and policies, the DoW will give due recognition to interoperability with allies and coalition partners and to the effect on the defense . It will also balance economic and scientific interests against those of national security. The objectives the instruction names include these [SAMM ]:
- The critical military technological advantages of the United States are kept
- Transfers that could harm U.S. security interests are limited and controlled
- Weapons of mass destruction and their means of delivery do not proliferate
- Defense-related goods are not diverted to terrorists
For a case that requires Congressional Notification under Section 36(b) of the , Table C5.T22 sets out specific releasability review and approval requirements. They must be met before the notification, and the must reflect them before it is offered [SAMM ].
The transfer, use and protection conditions
The governs the export of defense articles and defense services to foreign countries and international organizations and includes both commercial and government programs. It authorizes a list of controlled articles, the U.S. (), which is contained in the International Traffic in Arms Regulations () published by the Department of State. The forms the legal basis for the security requirements in most DoW international programs. The states that foreign sales (i.e., access) should be consistent with U.S. foreign policy interests, strengthen the security of the U.S., and contribute to world peace.
Section 3(a), , sets the conditions under which the U.S. Government () sells or leases defense articles and defense services to a country or international organization. The President must find that furnishing them will strengthen the security of the United States and promote world peace, and the recipient must have agreed to three security-related conditions [SAMM ] []. Section 505(a), Foreign Assistance Act (), requires a country that receives defense articles or defense services on a grant basis to agree to similar transfer, use and security conditions []. The three conditions are as follows:
- Transfer: The recipient country or organization agrees not to transfer title or possession of the articles or related to anyone who is not an officer, employee or agent of the country or organization without prior consent.
- Use: The recipient country or organization agrees not to use the articles or related or permit their use for other than the purpose for which they were furnished without prior consent.
- Protection: The recipient country or organization agrees to maintain security of the articles or related technical information, and provide substantially the same degree of security to it as does the .
These security-related conditions are incorporated into the process via the standard terms and conditions of each . Within any , the standard terms and conditions will be listed at Section 2 “General Purchaser Agreements.” Transfer, use, and protection are specifically addressed in subsections 2.4-2.6 of any . By stating these conditions of sale in the , the international partner agrees to these conditions when they sign to accept the .
Classified military information
() 13526, dated December 29, 2009, prescribes a uniform system for classifying, safeguarding and declassifying national security information. Under Section 4.1(a) of the order, a person may have access to classified information only after a favorable determination of eligibility, a signed nondisclosure agreement and a need to know the information. The order defines need-to-know as a determination that a prospective recipient requires access to specific classified information in order to perform or assist in a lawful and authorized governmental function [].
Under Section 4.1(e), persons authorized to disseminate classified information outside the executive branch shall ensure the protection of the information in a manner equivalent to that provided within the executive branch. Under Section 4.1(i)(2), an agency may pass another agency’s classified information to a foreign government in accordance with statute, the order, its implementing directives or direction of the President, or with the originating agency’s consent. Under Section 4.1(h), an agency shall safeguard Foreign Government Information () to a standard at least equivalent to that required by the government that furnished it [].
The is implemented by Classified National Security Information, title 32 of the Code of Federal Regulations (CFR), part 2001 and 2003, effective 25 June 2010. The Oversight Office (), National Archives and Records Administration (NARA), publishes “Classified National Security Information Directive 1” as the final rule pursuant to E.O. 13526 relating to classified national security information. It is also covered by Manual 5200.01, Program.
National Security Decision Memorandum () 119 provides the basic national policy governing decision-making on the disclosure of Classified Military Information () to foreign governments and international organizations. 119 defines as information under the control or jurisdiction of the Department of War or of primary interest to it, in written, oral or other form, that needs protection in the interest of national defense and security.
It is U.S. national and DoW policy that is a national security asset that must be protected, and is shared with a foreign government only when there is a clearly defined benefit for the United States, when officials designated under the DoW directive on disclosing classified military information authorize it, and when all of that directive’s requirements are met [SAMM ]. 119 assigns the Secretaries of and War joint responsibility for controlling releases of .
U.S. policy is to avoid creating false impressions of U.S. Government readiness to make classified military materiel, technology or information available. Proposals to foreign governments or international organizations that will lead to the disclosure of classified military information must therefore be authorized in advance by designated disclosure officials or by the National Disclosure Policy Committee. This includes the release of unclassified data, and it must be stated and acknowledged explicitly that no U.S. commitment to furnish the classified information or materiel is intended or implied until the disclosure has been approved. Some classified information, such as sensitive compartmented information and information, may need approval from outside the DoW and the National Disclosure Policy Committee [SAMM ].
The DoW directive on disclosing classified military information implements the National Disclosure Policy () [SAMM ].
Unclassified articles and controlled services
All international transfers, of both military and commercial (aka dual-use) articles, from the United States are controlled by U.S. export control law. These include the full spectrum of goods from pencils to advanced military weapons systems. Transfers can be permanent or temporary, and can take place in U.S. territory (e.g., title transfer) or abroad.
Controlled services by U.S. persons include, but are not limited to, defense services such as operational and maintenance training on military defense articles. Controlled transfers can take place on U.S. soil or abroad. For example, inviting international partners to witness the demonstration of a U.S. in the can be a controlled export activity. Certifying a or system for readiness, to include providing an aircraft airworthiness certification is a controlled .
References
SAMM
- SAMM C3.1.1
- SAMM C4.T1: Presidential Determination Criteria for Foreign Military Sales Eligibility
- SAMM C3.2.2: Avoiding False Impressions.
- SAMM C3.1.1.1
- SAMM C3.2.1: Policy on Disclosure of Classified Military Information to Foreign Government and International Organizations.
Public authorities
- AECA §3: Arms Export Control Act of 1976, as amended, §3 (22 U.S.C. §2753)
- FAA §505: Foreign Assistance Act of 1961, as amended, §505 (22 U.S.C. §2314), Furnishing of defense articles or related training or other defense service on grant basis
- DoD Instruction 2040.02, International Transfers of Technology, Articles, and Services
- EO 13526: Executive Order 13526, Classified National Security Information, 29 December 2009 (75 FR 707)
- NSDM 119: National Security Decision Memorandum 119, Disclosure of Classified United States Military Information to Foreign Governments and International Organizations, 20 July 1971
Related
Arms Export Control Act (AECA)
The basic U.S. law providing the authority and general rules for the conduct of Foreign Military Sales and commercial sales of defense articles, defense services, and training. The Arms Export Control Act (AECA) came into existence with the passage of the Foreign Military Sales Act (FMSA) of 1968. An amendment in the International Security Assistance and AECA of 1976 changed the name of FMSA to the AECA.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Executive Order (EO)
A numbered official document through which the President manages the operations of the Federal Government, normally used to create or change the organization or procedures of executive branch agencies; its authority rests on the Constitution or on powers that acts of Congress grant. The text of each executive order is published in the Federal Register once the President has signed it.
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Letter of Offer and Acceptance (LOA)
The legal instrument that lists the defense articles and services, including training, that the U.S. Government transfers to a foreign country or international organization, with their estimated costs and the terms and conditions. The benefitting partner does not sign a Building Partner Capacity (BPC) LOA.
The Letter of Offer and Acceptance (LOA) is the instrument the U.S. Government uses to sell under the Arms Export Control Act (AECA); signed LOAs and their later Amendments and Modifications are also called Foreign Military Sales (FMS) cases [SAMM C5.6.1].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Security Cooperation
Activities by which the Department of War encourages and enables international partners to cooperate with the United States toward strategic objectives, spanning every interaction with foreign defense and security establishments and every security assistance program the Department administers.
Under chapter 16 of Title 10, their purposes are to develop allied and friendly security capabilities for self-defense and multinational operations, to give U.S. forces peacetime and contingency access, and to build relationships promoting specific U.S. security interests [10 U.S.C. 301(7)].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Foreign Military Sales (FMS)
The part of U.S. security assistance, authorized by the Arms Export Control Act (AECA), in which eligible foreign governments and international organizations buy defense articles, services and training from the U.S. Government under formal government-to-government agreements.
The articles come either from Department of War stocks or from new procurement under contracts the Department manages [22 U.S.C. 2761, 22 U.S.C. 2762]. A sale is FMS whatever the source of the purchaser's financing.
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Technology Security
The comprehensive framework of policies, practices, and procedures designed to protect U.S. military and dual-use technologies from unauthorized access, transfer, or exploitation by adversaries.
SAMM Glossary, as of 26 October 2026
Industrial Base
The part of a national economy that manufactures and maintains goods, chiefly through factories, maintenance facilities, processing plants and laboratories, whether privately or government owned. For U.S. defense it is the public facilities, academic institutions and commercial companies that research, develop, produce, deliver and maintain weapon systems and their parts for the U.S. military, together with closely connected capacity in Canada.
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Munitions List
The list, in Part 121 of the International Traffic in Arms Regulations (ITAR), of the defense articles and defense services, related technical data included, that the Department of State controls for export and temporary import.
The U.S. Munitions List (USML) designates the specific items that are defense articles and defense services under Section 47 of the Arms Export Control Act (AECA), and marks Significant Military Equipment (SME) with an asterisk [SAMM C4.4] [22 U.S.C. 2794].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
ITAR: International Traffic in Arms Regulations
SAMM Acronyms, as of 12 September 2026
Glossary entry →International Traffic in Arms Regulation (ITAR) →
AECA: Arms Export Control Act
SAMM Acronyms, as of 12 September 2026
Technical Data
Recorded information of a scientific or technical nature, regardless of form or characteristic. Examples of technical data packages include research and engineering drawings and associated lists, specifications, standards, process sheets, manuals, technical reports, catalog item identifications, and related information and computer software documentation.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
LOA: Letter of Offer and Acceptance
SAMM Acronyms, as of 12 September 2026
Defense Article (Foreign Assistance Act; Arms Export Control Act, not including commercial sales subject to the International Traffic in Arms Regulation)
Any weapon, weapon system, munition, aircraft, vessel or other implement of war, together with the property, equipment, tooling, components and parts used to furnish military assistance or sales or to make, maintain or use such items; the International Traffic in Arms Regulations (ITAR) define the term separately for commercial exports.
Section 47 of the Arms Export Control Act (AECA) defines the term, and the U.S. Munitions List designates the specific items that fall within it [SAMM C4.4] [22 U.S.C. 2794].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Defense Service (Foreign Assistance Act (FAA); Arms Export Control Act (AECA))
Any service, test, inspection, repair, training or publication, any defense information, and any technical or other assistance used to furnish military assistance or sales. The term excludes military education and training under the Foreign Assistance Act (FAA), and design and construction services provided under section 29 of the Arms Export Control Act (AECA). Under the International Traffic in Arms Regulations (ITAR) the term also covers help given to foreign persons in designing, producing, maintaining, operating or using defense articles, and the furnishing of controlled technical data.
Section 47 of the AECA defines the term [SAMM C4.4].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Information Security (INFOSEC)
The protection of information systems against unauthorized access to or modification of information, whether in storage, processing, or transit, and against the denial of service to authorized users, including those measures necessary to detect, document and counter such threat. INFOSEC is applied through the application of Cybersecurity and Communications Security (COMSEC).
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
ISOO: Information Security Oversight Office
NSDM: National Security Decision Memorandum
Price and Availability (P&A)
Preliminary pricing and availability estimates for articles or services that an Implementing Agency (IA) prepares at the request of a foreign government or international organization for an international competition, or of a U.S. Government requesting authority for building partner capacity.
Price and Availability (P&A) responses are estimates of cost and availability, not valid for preparing a Letter of Offer and Acceptance (LOA), and furnishing them does not commit the U.S. Government to offer the articles or services for sale [SAMM C5.5.2, C5.5.1].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Communications Security (COMSEC)
The measures and controls taken to deny unauthorized persons’ information derived from telecommunications and other information systems, and technologies necessary to ensure the authenticity of such communications. COMSEC includes cryptographic security, transmission security, emissions security, and physical security of COMSEC material. Secure telecommunication or information system cryptographic components are the primary COMSEC products for transmission security and commonly called COMSEC devices or products. COMSEC devices are designated Controlled Cryptographic Items (CCI).
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Weapon System
A combination of one or more weapons with all related equipment, materials, services, personnel, and means of delivery and deployment (if applicable) required for self-sufficiency.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Continental United States (CONUS)
U.S. territory, including the adjacent territorial waters, located within the North American continent between Canada and Mexico. Does not include Hawaii or Alaska.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
SAMM C3.1.1
“DoD Instruction (DoDI) 2040.02 “International Transfers of Technology, Articles, and Services,” requires that the DoW treat dual-use and defense-related technology as valuable national security resources, to be protected and transferred only in pursuit of national security and foreign policy objectives. These objectives include ensuring that: critical U.S. military technological advantages are preserved; transfers that could prove detrimental to U.S. security …”
Security Assistance Management Manual, as of 5 October 2026
SAMM C3.1.1.1
“Technology Transfer Requirements prior to Congressional Notification. Table C5.T21. identifies specific releasability review and approval requirements, which must be met prior to Arms Export Control Act (AECA) Section 36(b) Congressional Notification (CN), for those cases that require notification. The Letter of Offer and Acceptance (LOA) must reflect the approval requirements prior to offer.”
Security Assistance Management Manual, as of 5 October 2026
SAMM C4.T1: Presidential Determination Criteria for Foreign Military Sales Eligibility
“Table C4.T1. Presidential Determination Criteria for Foreign Military Sales Eligibility # Eligibility Criteria 1 The President finds that the furnishing of defense articles and defense services to such country or international organization will strengthen the security of the United States and promote world peace; 2 The country or international organization has agreed not to transfer title to, or possession of, …”
Security Assistance Management Manual, as of 26 October 2026
Foreign Assistance Act of 1961, as amended, §505 (22 U.S.C. §2314), Furnishing of defense articles or related training or other defense service on grant basis
FAA §505 · Statute
Executive Order 13526, Classified National Security Information, 29 December 2009 (75 FR 707)
EO 13526 · Executive order
SAMM C3.2.1: Policy on Disclosure of Classified Military Information to Foreign Government and International Organizations.
“DoD Directive (DoDD) 5230.11 implements National Disclosure Policy (NDP-1). It is U.S. national and DoW policy that Classified Military Information (CMI) is a national security asset that must be protected and shared with foreign governments only when there is a clearly defined benefit to the United States, when authorized by officials designated under the Directive and then only when all …”
Security Assistance Management Manual, as of 5 October 2026
SAMM C3.2.2: Avoiding False Impressions.
“U.S. policy is to avoid creating false impressions of USG readiness to make available classified military materiel, technology, or information. Much military hardware is unclassified; however, its operation and maintenance or related training may involve sensitive classified information. Some classified information (e.g., sensitive compartmented information (SCI), communications security (COMSEC) information, etc.) may require approval outside of DoW and the National …”
Security Assistance Management Manual, as of 5 October 2026