Guide
What are nonstandard items in Foreign Military Sales?
A nonstandard item is one the Department of War does not manage, because the has left its inventory or was never bought for its own forces, so support relies on manual procedures that cost more and take longer. The Department of War will still take reasonable steps to support such items when satisfactory arrangements are made with the country and supply sources exist. Commercial buying services supply nonstandard parts, repairs and services to purchasers.
What are nonstandard items in Foreign Military Sales?
For purposes, a is one the Department of War does not manage, either because the it applies to has been retired or because it was never bought for Department of War components.
The use of aging weapon systems beyond their original life expectancies has placed unexpected demands on supply systems initially provisioned to support shorter life cycles. A combination of diminishing manufacturing support, failure of electronic components, fatigue and corrosion of non-electronic parts, and age, has created unanticipated demands for spares supporting older weapons systems. Exacerbating the problem, the original equipment manufacturer might not be capable of supplying spares, repair parts and engineering support for aging weapon systems. The original manufacturer might no longer exist.
Commercial Buying Services () involve the purchase of defense articles and services that cannot be effectively acquired through other means. The is authorized to use a for nonstandard items, and for standard items that are difficult to support, when Department of War (DoW) organic capability or contractual supportability is not available or timely [SAMM ].
The purchase of nonstandard items can have an impact on the follow-on support provided by the DoW. Nonstandard items, as they relate to , may be defined as any items or equipment not included in the DoW inventory or not purchased for regular use by the DoW. The DoW also considers as nonstandard those country-peculiar system configurations resulting from the installation of a nonstandard item on equipment or systems that make it dissimilar to like systems in the DoW inventory.
Nonstandard items are normally in channels for the following reasons:
- The international partner may change an item’s design to improve the desired mission.
- The U.S. may change the design for security reasons.
- An item may become obsolete as a result of technological advancements and improvements.
Follow-on support problems are encountered because the DoW does not manage nonstandard items, so normally no or is assigned to them. Instead of a relatively standard requisition and distribution system, manual procedures are used to satisfy international partner demands. This not only proves more costly to the U.S. but also increases the replacement time and costs for the international partner.
The following special programs provide contractor support for nonstandard items:
- The is managed by the U.S. Army. The program purchases nonstandard item components, repair parts and supplies of primarily land systems and communications equipment, and UH-1 helicopter spares.
- The Parts and Repair Ordering System () is a contractor-operated program that purchases nonstandard item components, repair parts, and supplies and arranges for maintenance of nonstandard items on a repair-and-return basis. Although the program is managed by the U.S. Air Force, the Army and Navy also use the program for nonstandard spares, nonstandard maintenance, and nonstandard services.
The options open to the include and [SAMM ].
Finding sources for supply of nonstandard items, particularly spare parts for end items no longer in the DoW inventory, has been an ongoing challenge. System support buyouts and efforts to withhold items with requirements from disposal are providing only a partial answer to this problem. contracts, such as , are filling an important need in this area. In addition to nonstandard item support, processes are a source of last resort for defense articles and services that cannot be supplied by the standard DoW logistics system in a timely manner.
Another use of the term “nonstandard” applies when the international partner requests DoW support for an item that the international partner purchased commercially, in a configuration not supported by the DoW. In this situation, it may become necessary for the international partner to provide manufacturing design specifications from the prime vendor to the DoW in order to determine the level of supportability through the DoW. This configuration study can be funded through an .
International partners may receive spare parts and support equipment that have been manufactured in other countries. This occurs when the contracts with a U.S. company, who outsources or subcontracts work to a foreign company or foreign subsidiary. The U.S. company imports the items to the U.S., where they are accepted by the DoW, become part of the DoW inventory, and are used by U.S. forces. Despite the fact that the items are manufactured abroad, they are considered to be of U.S.-origin and are exported to the international partner using the same procedures as if they had been manufactured in the U.S.
The DoW will take reasonable steps to support systems that U.S. forces do not use, including items U.S. forces never adopted. Support for such items is provided when mutually satisfactory arrangements have been made with the country concerned and sources of supply are available. An effort is made to support nonstandard items, whether they were acquired commercially or through , when that effort serves U.S. interests [SAMM ].
A request for that is not standard in the Department of War inventory is reviewed by the , which coordinates with the 's Office of International Operations before data or a is developed [SAMM ]. Nonstandard also needs a Standard Advisory Letter and a unique review [SAMM ]. In exceptional cases a purchaser may ask for data on a nonstandard subsystem; its request should describe the subsystem's performance characteristics and justify the request, including why U.S. systems do not meet its requirements, and the must approve any proposed response [SAMM ]. Before a counts as complete, whether it calls for nonstandard or equipment must be determined [SAMM ].
References
SAMM
- SAMM C5.2.6.3: Nonstandard (Significant Military Equipment).
- SAMM C5.T6: Defense Articles or Services that Require Item-specific Letter of Request Advisories or Review
- SAMM C5.5.2.2: Price and Availability for Nonstandard Subsystems.
- SAMM C5.T4B: Mandatory Criteria Before Letter of Request Complete
- SAMM C6.4.4: Commercial Buying Service.
- SAMM C4.4.3.2
Related
End Item
A finished combination of end products, component parts or materials, assembled or completed and ready for its intended use, issue or deployment, such as an aircraft, a truck, a mobile generator or a rifle.
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Foreign Military Sales (FMS)
The part of U.S. security assistance, authorized by the Arms Export Control Act (AECA), in which eligible foreign governments and international organizations buy defense articles, services and training from the U.S. Government under formal government-to-government agreements.
The articles come either from Department of War stocks or from new procurement under contracts the Department manages [22 U.S.C. 2761, 22 U.S.C. 2762]. A sale is FMS whatever the source of the purchaser's financing.
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Nonstandard Article
For Foreign Military Sales purposes, a nonstandard article is one that the DoD does not manage, either because an applicable end item has been retired or because it was never purchased for DoD components.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
International Logistics Control Office (ILCO)
The office in each Military Department that manages the logistics support programs and transactions of Foreign Military Sales (FMS) and other security cooperation programs, and the central point in the continental United States for monitoring purchasers' requisitions.
A purchaser reports a valid supply discrepancy to the International Logistics Control Office (ILCO) of the Military Department concerned [SAMM C2.1.5.4.3].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
FMS: Foreign Military Sale
SAMM Acronyms, as of 12 September 2026
Inventory Control Point (ICP)
The organization within a Department of War supply system that manages a group of items for one Military Service or for the whole Department, computing requirements, starting procurement or disposal actions, managing distribution and directing rebuild.
The inventory control point that processes a standard requisition generally issues the assets down to the item's reorder point level [SAMM C6.4.3.1].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Item Manager (IM)
An individual within the organization of an inventory control point or other such organization assigned management responsibility for one or more specific items of materiel.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Simplified Non-Standard Acquisition Program (SNAP)
U.S. Army Security Assistance Command's logistics program that provides an accelerated acquisition process for Foreign Military Sales partners to obtain non-standard items such as obsolete or unique items not available through the U.S. Army supply channels using Simplified Acquisition Procedures.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
ILCO: International Logistics Control Office
SAMM Acronyms, as of 12 September 2026
Glossary entry →International Logistics Control Office (ILCO) →
Letter of Offer and Acceptance (LOA)
The legal instrument that lists the defense articles and services, including training, that the U.S. Government transfers to a foreign country or international organization, with their estimated costs and the terms and conditions. The benefitting partner does not sign a Building Partner Capacity (BPC) LOA.
The Letter of Offer and Acceptance (LOA) is the instrument the U.S. Government uses to sell under the Arms Export Control Act (AECA); signed LOAs and their later Amendments and Modifications are also called Foreign Military Sales (FMS) cases [SAMM C5.6.1].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Implementing Agency (IA)
The military department or defense agency responsible for the execution of military assistance programs. With respect to FMS, the military department or defense agency assigned responsibility by the Defense Security Cooperation Agency to prepare an LOA and to implement an FMS case. The implementing agency is responsible for the overall management of the actions that will result in delivery of the materials or services set forth in the LOA that was accepted by a foreign country or international organization.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Significant Military Equipment (SME)
Defense articles for which special export controls are warranted because of the capacity of such articles for substantial military utility or capability. These items are identified on the U.S. Munitions List in the International Traffic in Arms Regulations by an asterisk preceding the item category listing.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Defense Security Cooperation Agency (DSCA)
The Department of War agency that directs, administers and provides guidance to the Department's components and its representatives at U.S. missions for the execution of the security cooperation programs for which it is responsible [SAMM C1.3.2.2]. The agency also provides financial and technical assistance, arranges the transfer of defense materiel, training and services to international partners, and promotes military-to-military contacts.
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Price and Availability (P&A)
Preliminary pricing and availability estimates for articles or services that an Implementing Agency (IA) prepares at the request of a foreign government or international organization for an international competition, or of a U.S. Government requesting authority for building partner capacity.
Price and Availability (P&A) responses are estimates of cost and availability, not valid for preparing a Letter of Offer and Acceptance (LOA), and furnishing them does not commit the U.S. Government to offer the articles or services for sale [SAMM C5.5.2, C5.5.1].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Letter of Request (LOR)
The term used to identify a request from an eligible FMS participant country for the purchase of U.S. defense articles and services. The request may be in message or letter format.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Non-Program of Record (NPOR)
A capability or system that is not identified as a Program of Record by the U.S. Department of Defense.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
SAMM C6.4.4: Commercial Buying Service.
“The International Logistics Control Office (ILCO) is authorized to use a Commercial Buying Service (CBS) to support FMS purchaser requirements for nonstandard and difficult to support standard items when DoW organic capability or contractual supportability is not available or timely. Existing CBS options include Parts and Repair Ordering System (PROS) and Simplified Non-Standard Acquisition Program (SNAP).”
Security Assistance Management Manual, as of 26 October 2026
SAMM C4.4.3.2
“DoW will take reasonable steps to support systems that are not used by U.S. Forces including items that were never adopted by U.S. Forces. Support is provided for these items when mutually satisfactory arrangements are made with the country involved and supply sources are available. Effort is made to support non-standard items, whether acquired commercially or through FMS, when this …”
Security Assistance Management Manual, as of 26 October 2026
SAMM C5.2.6.3: Nonstandard (Significant Military Equipment).
“The IA reviews requests for SME not standard in DoW inventory and coordinates with DSCA (IOPS) prior to development of P&A data or an LOA.”
Security Assistance Management Manual, as of 5 October 2026
SAMM C5.T6: Defense Articles or Services that Require Item-specific Letter of Request Advisories or Review
“Table C5.T6. Defense Articles or Services that Require Item-specific Letter of Request Advisories or Review Item Requirement Notes Air-to-surface (A/S) munitions greater than or equal to 105mm in diameter, ship-to-shore munitions, indirect fire S/S munitions, and the associated A/S and S/S delivery systems. Standard Advisory Letter Form (See Figure C5.F5B.) Unique review (See Section C4.4.18.) Ballistic Missile Defense Capability Standard …”
Security Assistance Management Manual, as of 5 October 2026
SAMM C5.5.2.2: Price and Availability for Nonstandard Subsystems.
“P&A data normally includes standard U.S. subsystems. In exceptional cases, purchasers may request P&A data for nonstandard subsystems. The purchaser’s P&A request should include a description of the performance characteristics of any nonstandard subsystem(s) and supporting justification, including why U.S. systems do not meet the purchaser’s requirements. DSCA must approve any proposed responses to requests for nonstandard subsystems. If an …”
Security Assistance Management Manual, as of 26 October 2026
SAMM C5.T4B: Mandatory Criteria Before Letter of Request Complete
“Table C5.T4B. Mandatory Criteria Before Letter of Request Complete # Criteria 1 Determine the purchaser’s authorized term(s) of sale. See Section C9.8. 2 If a CTA and CCMD endorsement are required, ensure they have been provided, and that all necessary elements have been satisfied. See Section C5.1.5. and Section C5.6.5.4. 3 The request is specific enough to enable a responsible …”
Security Assistance Management Manual, as of 26 October 2026