Guide
How is a Supply Discrepancy Report submitted and resolved?
Before reporting a suspected discrepancy, the purchaser should check it against the time limit, the minimum value and its cause. The report goes on a Standard Form 364 or an electronic equivalent, with its supporting documents, to the of the service managing the case, and that office edits it and passes it to the supply source. The , with the supply source, resolves the report and decides financial responsibility, and an approved report is settled by a financial credit, a repair or a replacement item.
How is a Supply Discrepancy Report submitted and resolved?
The purchaser reports a supply discrepancy to the appropriate ’s on a Standard Form (SF) 364, [SAMM , ]. The , together with the Department of War (DoW) or commercial supply source, resolves the and determines financial responsibility [SAMM ].
To determine if a suspected discrepancy should be reported, a step-by-step process is recommended, which involves the elements of time, value, and determination of the cause of the discrepancy.
The international partner should inspect each delivery upon receipt to ensure that the correct item is received in the correct amount and in good condition.
The Standard Terms and Conditions, Section 5.4, set the time limit [SAMM ]. The U.S. Government () disallows a late claim unless it determines that unusual and compelling circumstances involving latent defects justify its consideration [SAMM , ]. The time limit allows the international partner time to receive, inspect, and, if necessary, test the materiel. It does not constitute a warranty, but rather allows the international partner to assemble the necessary documentation to support a claim for a discrepancy. A latent defect is one that exists at the time of acceptance but cannot be identified by a reasonable inspection.
For a , the purchaser agrees to submit an within one year after the end of the service’s scheduled period of performance [SAMM ]. The will disallow an for non-shipment or non-receipt received later than one year after the scheduled delivery date or the initial billing, whichever is later. A claim received after that year may still be considered to the extent that the actual delivery came later than the scheduled date [SAMM ].
Time limits for reporting discrepancies under contractor warranties are set in the individual warranty clauses, the contracts, or both. The purchaser must submit within the contractor warranty timeframe, even when the warranty ends less than a year after delivery of the defense articles or passage of title to them [SAMM ]. The same holds for a whose warranty ends less than a year after its scheduled period of performance [SAMM ].
Next, the international partner should determine if the suspected discrepancy is, in fact, valid. are processed only when the estimated value is $200 or greater, except for misdirected or unordered shipments. This minimum value includes the value of the item plus any transportation and handling costs. International partners may submit regardless of the dollar value so that problems can be documented, but only those over the minimum dollar value are reviewed for possible compensation [SAMM ].
That minimum value applies whatever the type of discrepancy, except for misdirected or unordered shipments [SAMM ].
Either the shipper () or the carrier resolves a reported discrepancy.
If the discrepancy is a shipper or billing responsibility, an should be prepared and forwarded to the appropriate for initial processing [SAMM ].
The SF 364, , is the document used in reporting selected discrepancies to the . Instructions for SF 364 completion, DoW processing time frames, and responsibilities are located in Defense Logistics Management (DLM) 4000.25, Defense Logistics Management Standards (), Volume 2, Chapter 17. The process is not applicable to Building Partner Capacity () cases [SAMM , ]. The requirement for the international partner to submit reports of discrepancy on an SF 364 is included in the conditions of each negotiated with the country. International partners may use the to submit electronically instead of using the SF 364.
The U.S. may assist the international partners in articulating the discrepancy so that it is understandable by the [SAMM ]. However, the has no role in accepting or adjudicating the on behalf of the international partner or .
materiel that is confirmed to be missing will be reported by the on a Transportation Discrepancy Report () [SAMM ].
The SF 364 along with a copy of all applicable documentation should be forwarded to the of the military service managing the . Electronic submission of the via , or some other electronic medium, will speed up the investigation process. Photographs of materiel as received, which involve damaged or mislabeled materiel, should be attached to the SF 364 or uploaded along with the electronic as evidence to substantiate the claim. If available, other documents that should accompany the SF 364 include copies of the DD Form 1348-1A, Issue Release/Receipt Document; DD Form 250 or Wide Area Workflow (WAWF) electronic equivalent, Material Inspection and Receiving Report; and any previously received status reports, bills of lading, drawings, and any other related documents that support the .
Any movement document or receipt counts as evidence of shipment if a carrier representative has signed it and it shows that the United States shipped or released the materiel to a carrier for onward shipment to the country's designated representative. Such documents generally show the date, the addressee, the quantity and the . They generally also show the , the , the vessel, voyage or flight number where possible, the number, the bill of lading, parcel post insured or registered number, and the names of the shipper and carrier. This information is essential when are adjudicated. When proof of delivery to a carrier is asked for and the consignee copy of the bill of lading has not reached the , the purchaser's representative gets a duplicate of the appropriate documents that establish evidence of shipment [SAMM ].
When an is received from an international partner, the acknowledges receipt to the international partner. The receiving activity then makes an initial edit of the for proper format, and a second edit against the management information system. If correct, the is recorded, entered into the processing system, and forwarded to the appropriate or shipping activity for further processing. If the initial edit by the reveals that the was submitted in error, e.g., not in accordance with the conditions on the or was submitted with insufficient information for processing, the is rejected with the reason(s) indicated.
The should respond to an accepted within the timeframes established in DLM 4000.25, Volume 2, Chapter 17 [SAMM ]. If an international partner’s request for compensation under this procedure is denied by the concerned, i.e., an unfavorable finding, the international partner may request reconsideration by resubmitting the within the time the manual allows. A copy of the original , annotated to indicate that it is a resubmission along with all supporting documentation, is resubmitted to the . The international partner should include a cover letter explaining why the original finding is thought to be incorrect. If the international partner remains dissatisfied with the second response, the may be resubmitted a third time. A third submission is normally accomplished only if there is additional documentation to support the claim.
The appropriate or shipping activity of the source of supply provides the reply to the .
Compensation for an approved may be in the form of a financial credit, a repair service, or a replacement item [SAMM ]. If the discrepancy was for a lost, damaged, or incorrect item, the international partner may request a replacement item. In that case, the will coordinate with the to ship a replacement asset without having the international partner reorder the item. If the discrepancy is financial, the will coordinate with the Defense Finance and Accounting Service () to take appropriate financial action on the international partner account. The billing statement furnished to the international partner on a quarterly basis (DD Form 645) will reflect such financial adjustments. If the discrepancy involves a quality or performance defect, the may determine that repair services are the most appropriate method to resolve the discrepancy.
approval of an is required when the determines that the is liable for correction of the discrepancy and recommends use of funds in excess of $50,000, or when the involves an issue likely to be raised to [SAMM ].
Whenever discrepant materiel is to be returned to U.S. custody, the purchasing country will be directed to reship the materiel using the same document number under which the materiel was originally shipped.
For discrepant materiel other than classified or and arms, arms parts or explosives, the purchaser agrees to ship the articles within 180 days of receiving U.S. Government direction for the return [SAMM ].
Upon evidence of materiel being returned, a credit adjustment will be processed for the return of the discrepant materiel if previously authorized. This evidence releases the international partner of liability for the materiel.
In the case of misdirected or unordered classified or , or arms, arms parts or explosives, the purchasing country ships the materiel within 30 days of direction for the return [SAMM ].
Try the tool: Discrepancy report or claim?
References
SAMM
- SAMM C6.4.10: Supply Discrepancies.
- SAMM C2.1.5.4.3: Supply Discrepancy Reports.
- SAMM C5.F9: Letter of Offer and Acceptance Standard Terms and Conditions
- SAMM C6.4.10.1: Timeframes for Submission.
- SAMM C15.5.6.5.3.1: Discrepancy Reporting.
- SAMM C6.4.10.4: Supply Discrepancy Report Responses.
- SAMM C6.T4: Methods of Financing Approved Supply Discrepancy Reports
- SAMM C6.4.10.7: Defense Security Cooperation Agency Supply Discrepancy Report Review.
- SAMM C6.4.10.1.1
- SAMM C6.4.10.2
- SAMM C6.4.10.6: Shipment Documentation.
Facts referenced
- Months after delivery during which a partner may submit a Supply Discrepancy Report, after which cases are closed (ACCP eligibility): 12 months (as of 28 September 2026; SAMM C16.3.1.1.1.1)
- Minimum value (item plus transportation and handling) at which a Supply Discrepancy Report is reviewed for possible compensation (LOA Standard Terms and Conditions, Section 5.4): $200 (as of 11 September 2026; SAMM C5.F9)
- FMS funds recommended for an SDR correction above which DSCA reviews and approves or disapproves the SDR: $50,000 (as of 26 October 2026; SAMM C6.4.10.7)
- Days within which the purchaser ships discrepant articles (other than classified or sensitive materiel and arms, arms parts or explosives) after receiving USG direction to return them: 180 days (as of 26 October 2026; SAMM C6.4.10.1.1)
- Days within which the purchaser ships misdirected or unordered classified or sensitive materiel, or arms, arms parts or explosives, after USG direction to return them: 30 days (as of 26 October 2026; SAMM C6.4.10.1.1)
Related
International Logistics Control Office (ILCO)
The office in each Military Department that manages the logistics support programs and transactions of Foreign Military Sales (FMS) and other security cooperation programs, and the central point in the continental United States for monitoring purchasers' requisitions.
A purchaser reports a valid supply discrepancy to the International Logistics Control Office (ILCO) of the Military Department concerned [SAMM C2.1.5.4.3].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Implementing Agency (IA)
The military department or defense agency responsible for the execution of military assistance programs. With respect to FMS, the military department or defense agency assigned responsibility by the Defense Security Cooperation Agency to prepare an LOA and to implement an FMS case. The implementing agency is responsible for the overall management of the actions that will result in delivery of the materials or services set forth in the LOA that was accepted by a foreign country or international organization.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Military Department (MILDEP)
One of the departments within the DoD created by the National Security Act of 1947, as amended. The Military Departments are: the Department of the Air Force, the Department of the Army, and the Department of the Navy.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Supply Discrepancy Report (SDR)
A process for international customers to file a complaint with the DoD for product loss, quality deficiencies, damage, and various other problems associated with the delivery of material under the Foreign Military Sales program.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
SDR: Supply Discrepancy Report
SAMM Acronyms, as of 12 September 2026
Letter of Offer and Acceptance (LOA)
The legal instrument that lists the defense articles and services, including training, that the U.S. Government transfers to a foreign country or international organization, with their estimated costs and the terms and conditions. The benefitting partner does not sign a Building Partner Capacity (BPC) LOA.
The Letter of Offer and Acceptance (LOA) is the instrument the U.S. Government uses to sell under the Arms Export Control Act (AECA); signed LOAs and their later Amendments and Modifications are also called Foreign Military Sales (FMS) cases [SAMM C5.6.1].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Defense Service (Foreign Assistance Act (FAA); Arms Export Control Act (AECA))
Any service, test, inspection, repair, training or publication, any defense information, and any technical or other assistance used to furnish military assistance or sales. The term excludes military education and training under the Foreign Assistance Act (FAA), and design and construction services provided under section 29 of the Arms Export Control Act (AECA). Under the International Traffic in Arms Regulations (ITAR) the term also covers help given to foreign persons in designing, producing, maintaining, operating or using defense articles, and the furnishing of controlled technical data.
Section 47 of the AECA defines the term [SAMM C4.4].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
ILCO: International Logistics Control Office
SAMM Acronyms, as of 12 September 2026
Glossary entry →International Logistics Control Office (ILCO) →
LOA: Letter of Offer and Acceptance
SAMM Acronyms, as of 12 September 2026
Security Cooperation Information Portal (SCIP)
A web-based tool, managed by the Defense Security Cooperation Agency (DSCA), that gives international purchasers, their agents such as freight forwarders, and authorized U.S. Government personnel information on Foreign Military Sales (FMS) cases and other security cooperation programs.
It covers case, line, requisition and supply data, supply transactions and end-use monitoring information, drawn from the Defense Security Assistance Management System (DSAMS) and the Military Departments' case execution systems.
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Security Cooperation Organization (SCO)
A Department of Defense element that is part of the United States Diplomatic mission located in a foreign country to carry out security assistance and security cooperation management functions under the supervision and coordination authority of the senior defense official/defense attaché.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
SCO: Security Cooperation Organization
SAMM Acronyms, as of 12 September 2026
Foreign Military Sales (FMS) Case
A Letter of Offer and Acceptance (LOA) that the purchaser has accepted, together with every Amendment and Modification later made to it: the agreement under which the U.S. Government transfers defense articles and services in the Foreign Military Sales (FMS) program.
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
SCIP: Security Cooperation Information Portal
SAMM Acronyms, as of 12 September 2026
Glossary entry →Security Cooperation Information Portal (SCIP) →
National Stock Number (NSN)
The thirteen-digit code given to each item of supply that the federal supply system repeatedly stocks, stores and issues, made up of the item's four-digit Federal Supply Classification code and its nine-digit National Item Identification Number.
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Mode of Transport
One of, or a combination of, the following modes used for a movement:
inland surface transportation (rail, road, and inland waterway);
sea transport (coastal and ocean);
air transportation; and
pipelines.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Transportation Control Number (TCN)
A 17-character data element assigned to control and manage every shipment unit throughout the transportation pipeline and for payment processing. The TCN for each shipment unit is unique and not to be duplicated within the Defense Transportation System during the life cycle of the TCN. See Defense Travel Regulation Part II, Appendix L for additional information on proper TCN construction.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Notice of Availability (NOA)
Notice, on DD Form 1348-5, from a shipping activity to a Foreign Military Sales (FMS) purchaser or its freight forwarder that materiel is ready for shipment, in time for the recipient to prepare for receipt and respond with delivery instructions.
The Notice of Availability (NOA) goes to the appropriate address in the Military Assistance Program Address Directory (MAPAD) and coordinates the release of materiel requiring special receipt, export processing or special storage procedures [SAMM C7.11.1].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Freight Forwarder
A commercial import/export company registered with the Department of State, Bureau of Political-Military Affairs, Directorate of Defense Trade Controls and under contract to the Foreign Military Sales customer which arranges transportation of materiel from a point specified in the Letter of Offer and Acceptance to the final destination.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
FMS: Foreign Military Sale
SAMM Acronyms, as of 12 September 2026
Inventory Control Point (ICP)
The organization within a Department of War supply system that manages a group of items for one Military Service or for the whole Department, computing requirements, starting procurement or disposal actions, managing distribution and directing rebuild.
The inventory control point that processes a standard requisition generally issues the assets down to the item's reorder point level [SAMM C6.4.3.1].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
DSCA: Defense Security Cooperation Agency
SAMM Acronyms, as of 12 September 2026
Glossary entry →Defense Security Cooperation Agency (DSCA) →
Item Manager (IM)
An individual within the organization of an inventory control point or other such organization assigned management responsibility for one or more specific items of materiel.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Defense Security Cooperation Agency (DSCA)
The Department of War agency that directs, administers and provides guidance to the Department's components and its representatives at U.S. missions for the execution of the security cooperation programs for which it is responsible [SAMM C1.3.2.2]. The agency also provides financial and technical assistance, arranges the transfer of defense materiel, training and services to international partners, and promotes military-to-military contacts.
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Sensitive Materiel
Volatile and dangerous explosives which require special handling and transportation arrangements. The term sensitive also applies to highly desirable selected technologies which are not explosive, but which require special security procedures for transportation.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
SAMM C6.4.10: Supply Discrepancies.
“The USG makes every effort to provide the correct defense article or service in the quantity and quality shown in the LOA. In the event of a discrepancy, the purchaser submits an SDR using Standard Form (SF) 364. Instructions for SF 364 completion, DoW processing timeframes, and responsibilities are located in the Defense Logistics Management (DLM) 4000.25, Defense Logistics Management …”
Security Assistance Management Manual, as of 26 October 2026
SAMM C2.1.5.4.3: Supply Discrepancy Reports.
“Valid supply discrepancies are reported by the country to the appropriate MILDEP’s International Logistics Control Office (ILCO) using a Standard Form (SF) 364. MILGPs should understand Supply Discrepancy Report (SDR) procedures and, in some cases, be prepared to assist the partner nation in determining whether a valid supply discrepancy exists and with preparing an SF 364. MILGPs can find detailed …”
Security Assistance Management Manual, as of 26 October 2026
SAMM C6.4.10.4: Supply Discrepancy Report Responses.
“The IA, in conjunction with the DoW or commercial supply source, resolves SDRs and determines financial responsibility. The IA designates a single point of contact for SDR corrective action. Only this point of contact and DSCA are authorized to accept and convey USG liability or originate a commitment for corrective action. Commitments to the purchaser for U.S. financing of discrepancies …”
Security Assistance Management Manual, as of 26 October 2026
SAMM C5.F9: Letter of Offer and Acceptance Standard Terms and Conditions
“… 5.4. The Purchaser agrees to accept DD Forms 645 or other delivery documents as evidence that title has passed and items have been delivered. Title to defense articles transported by parcel post passes to the Purchaser at the time of parcel post shipment. Standard Form 364 (Supply Discrepancy Report (SDR)) will be used in submitting claims to the USG for”
Security Assistance Management Manual, as of 11 September 2026
SAMM C6.4.10.1: Timeframes for Submission.
“SDRs are more easily resolved when they are submitted promptly. The longer the time between when the discrepancy occurs and when the SDR is submitted, the more difficult it is to find supporting documentation and informed personnel. The purchaser agrees to submit an SDR no later than one year after delivery or after passage of title to the defense articles, …”
Security Assistance Management Manual, as of 26 October 2026
SAMM C6.4.10.2
“Time limits for reporting discrepancies relating to contractor warranties are prescribed in the individual warranty clauses and/or contracts. SDRs must be submitted by the purchaser within the contractor warranty timeframe, even when the warranty timeframe is less than one year after delivery or passage of title to the defense articles or less than one year after the scheduled period of …”
Security Assistance Management Manual, as of 26 October 2026
SAMM C15.5.6.5.3.1: Discrepancy Reporting.
“The MILGP will report on a Transportation Discrepancy Report (TDR) materiel that is confirmed to be missing or damaged during transportation.”
Security Assistance Management Manual, as of 5 October 2026
SAMM C6.4.10.6: Shipment Documentation.
“Any movement document or receipt, signed by a carrier representative, showing that the United States shipped or released materiel to a carrier for shipment to the country’s designated representative, constitutes evidence of shipment. Such documents generally show the quantity; National Stock Number (NSN); mode of transport; date; Transportation Control Number (TCN); notice of availability number; bill of lading, parcel post …”
Security Assistance Management Manual, as of 26 October 2026
SAMM C6.T4: Methods of Financing Approved Supply Discrepancy Reports
“Table C6.T4. Methods of Financing Approved Supply Discrepancy Reports Nature of Discrepancy Source of Supply (SoS) Foreign Military Sales (FMS) Funds 1 (Admin, Packing Crating & Handling, Transportation) United States Government Funds/Appropriations (Defense Working Capital Fund, Procurement Appropriation, Operation & Maintenance, Research, Development, Test & Evaluation) Damage, Defect, or Other Deficiency Procurement2 Generally not applicable except where U.S. action or …”
Security Assistance Management Manual, as of 26 October 2026
SAMM C6.4.10.7: Defense Security Cooperation Agency Supply Discrepancy Report Review.
“DSCA reviews and approves or disapproves SDRs when the IA determines the USG is liable for correction and recommends use of FMS funds in excess of $50,000; or the SDR involves an issue likely to be raised to DSCA. When either of these criteria are met, the IA must submit a complete SDR package through its Headquarters which meets all …”
Security Assistance Management Manual, as of 26 October 2026
SAMM C6.4.10.1.1
“The Purchaser agrees to report misdirected or unordered shipments. The Purchaser further agrees to report such shipments containing items that are identified as classified/sensitive materiel, and/or arms, arms parts, or explosives, within 24 hours of discovery, regardless of dollar value, for disposition instructions from the USG. The Purchaser agrees to ship such classified/sensitive materiel, and/or arms, arms parts, or explosives …”
Security Assistance Management Manual, as of 26 October 2026