Guide
What is a Blanket Order case in Foreign Military Sales?
A buys a category of items, services or training up to a dollar value, with no list of the exact items or quantities. The purchaser sets the ceiling and submits its own requisitions while the case has funds. It is the usual case for follow-on support and training once a system's initial support period ends.
What the LOA line states decides the type of case. A Defined Order case states the items explicitly, line by line, and a Blanket Order case only categories and a dollar ceiling. A Cooperative Logistics Supply Support Arrangement is two cases, the FMSO I, which buys equity in the U.S. supply system, and the FMSO II, which the purchaser requisitions against.
Blanket Order cases
A is one in which the international partner purchases a category of items, services, or training at a set dollar value ceiling with no definitive listing of the exact items or quantities desired. The purchaser specifies the case or line dollar value on the [SAMM ]. On a , international partners can submit requisitions as long as the case has funds available.
The scope of a or line is limited to the categories of items or services it specifies and to the case or line dollar value that the purchaser sets on the . Any service the provides is part of the scope of the case [SAMM ].
Separate Blanket Order lines are required for each category of item, and Blanket Order lines added to a for initial support are preferably developed as a stand-alone for continued life-cycle sustainment [SAMM ].
Unclassified items and services that are not can be provided on Blanket Order cases or lines. The types include [SAMM ]:
- supplies (fuel, personnel items, commercial consumable items)
- support equipment (tools, test equipment)
- spares and repair parts (consumables and repairables)
- maintenance (repair, rebuild, minor modifications or alterations)
- unclassified software
- training aids
- technical assistance (specialist advice or actions, item checkout, system integration, technical assistance teams, systems evaluation, study groups to develop engineering requirement plans)
- publications (forms, stock lists, catalog data, technical order manuals, maps, reports, books)
Both unclassified and classified training may be put on a Blanket Order training case or case line, but classified training must be kept in a separate classified training line. Classified publications, technical manuals and reports among them, may be included on Blanket Order lines. When they are, the line and its line note must be developed in accordance with Table C5.T11 [SAMM ].
A is typically used for follow-on support and training for a or following the initial support period. Initial or concurrent support is usually included in the original system sale as part of the . Depending on the , a Blanket Order follow-on support case may be established for each category of item/service to be provided, for each /, or for support of multiple systems.
References
SAMM
- SAMM C5.6.4.2: Blanket Order Cases or Lines.
- SAMM C5.T11: Blanket Order Case Conditions for Classified Publications
- SAMM C5.6.4.2.1: Scope on Blanket Order Cases or Lines.
- SAMM C5.6.4.2.2: Items Provided on Blanket Order Cases or Case Lines.
Related
Blanket Order Case (Foreign Military Sales)
A Foreign Military Sales (FMS) case for a category of defense articles or services, training included, with no definitive list of items or quantities, written against a dollar ceiling.
A Blanket Order case remains in effect until the purchaser has requisitioned articles or services up to the funds available on it [SAMM C5.6.13.4].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Letter of Offer and Acceptance (LOA)
The legal instrument that lists the defense articles and services, including training, that the U.S. Government transfers to a foreign country or international organization, with their estimated costs and the terms and conditions. The benefitting partner does not sign a Building Partner Capacity (BPC) LOA.
The Letter of Offer and Acceptance (LOA) is the instrument the U.S. Government uses to sell under the Arms Export Control Act (AECA); signed LOAs and their later Amendments and Modifications are also called Foreign Military Sales (FMS) cases [SAMM C5.6.1].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
LOA: Letter of Offer and Acceptance
SAMM Acronyms, as of 12 September 2026
Defense Transportation System (DTS)
The part of the worldwide transportation infrastructure that supports Department of War transportation needs in peace and war, made up of military (organic) and commercial resources that are organic to the Department, under contract to it or controlled by it [SAMM C7.6.1].
It takes in organic and commercial aircraft and ships, commercial small-package services under Department contract, and U.S. military air and ocean terminals in and outside the United States.
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Defined Order Case
A Letter of Offer and Acceptance (LOA) that provides specific defense articles and/or defense services with definitive items, quantities, and/or Months of anticipated materiel delivery or performance of services on the LOA lines.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Significant Military Equipment (SME)
Defense articles for which special export controls are warranted because of the capacity of such articles for substantial military utility or capability. These items are identified on the U.S. Munitions List in the International Traffic in Arms Regulations by an asterisk preceding the item category listing.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Military Articles And Services List (MASL)
A catalogue of materiel, services, and training used in the planning and programming of International Military Education and Training (IMET), and Foreign Military Sales (FMS). Separate MASLs are maintained for IMET and FMS training that provides data on course identification, course availability, price, and duration of training.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Major Item
Defense articles identified in the Military Articles and Services List (MASL) with a unit of issue other than "XX" (dollar lines)." Control over the programming of these items is required.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Weapon System
A combination of one or more weapons with all related equipment, materials, services, personnel, and means of delivery and deployment (if applicable) required for self-sufficiency.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Total Package Approach (TPA)
A means of ensuring that Foreign Military Sales customers are aware of and are given the opportunity to plan for and obtain needed support items, training, and services from the USG contractors, or from within the foreign country's resources which are required to introduce and operationally sustain major items of equipment or systems.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Implementing Agency (IA)
The military department or defense agency responsible for the execution of military assistance programs. With respect to FMS, the military department or defense agency assigned responsibility by the Defense Security Cooperation Agency to prepare an LOA and to implement an FMS case. The implementing agency is responsible for the overall management of the actions that will result in delivery of the materials or services set forth in the LOA that was accepted by a foreign country or international organization.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
SAMM C5.6.4.2.1: Scope on Blanket Order Cases or Lines.
“Scope on Blanket Order cases or lines is limited to the specified categories of items or services and the FMS purchaser-specified case or line dollar value on the LOA. Any service provided by DTS is included as part of the scope of the case.”
Security Assistance Management Manual, as of 5 October 2026
SAMM C5.6.4.2: Blanket Order Cases or Lines.
“Blanket Order cases or lines are used to provide categories of items or services (normally to support one or more end items) with no definitive listing of items, quantities, or MOS with the intent to use the lines until funds are exhausted. Separate Blanket Order lines are required for each category of item. Blanket Order lines may be added to …”
Security Assistance Management Manual, as of 5 October 2026
SAMM C5.6.4.2.2: Items Provided on Blanket Order Cases or Case Lines.
“Types of unclassified, non-SME items or services that can be provided on Blanket Order cases or lines include spares and repair parts (consumables and repairables), support equipment (tools, test equipment), supplies (fuel, personnel items, commercial consumable items), maintenance (repair, rebuild, minor modifications or alterations), technical assistance (specialist advice or actions, system integration, item checkout, systems evaluation, study groups to develop …”
Security Assistance Management Manual, as of 26 October 2026