Guide
Which contractor costs are allowable on a Foreign Military Sales contract?
contracts follow the same pricing principles as U.S. Government contracts. The Defense Supplement also allows some costs of doing business with a foreign government that a U.S.-only contract would not carry, such as selling expenses, product support and offset costs, as long as each is allocable and reasonable. The special rules do not apply when the purchase is wholly paid for with nonrepayable funds, such as grant financing; those cases revert to the standard rules. Contingent fees above a set amount, or of any amount for some countries, need the purchaser's written approval.
Which contractor costs are allowable on a Foreign Military Sales contract?
In pricing a contract for which no non-U.S. Government price exists, the recognizes the reasonable and allocable costs of doing business with a foreign government or an international organization, such as selling expenses, product support and offsets []. Those costs are recognized even where other defense contracts might not recognize them in the same amounts, except when the acquisition is paid for wholly with nonrepayable funds [, ].
Contracting officers follow the additional procedures in Defense Supplement () Procedures, Guidance, and Information (PGI) 225.7301 when they prepare solicitations and contracts that include requirements []. Under the PGI, a solicitation separately identifies known requirements and the customer, and a contract for known requirements is identified by the code in section B of the Schedule. Industry needs this information because special cost allowability rules can apply to .
The and provisions are intended to ensure procurement at fair and reasonable prices. In addition to protecting U.S. Government interests, the and also attempt to treat contractors fairly. 225.7303-2 applies in pricing contracts where non-U.S. Government prices do not exist. It recognizes the reasonable and allocable costs of doing business with a foreign government or international organization, even though such costs might not be recognized in the same amounts in pricing other defense contracts []. Although the same pricing principles are used, contract prices are not always identical to the Department of War (DoW) contract prices. This situation is due to slightly different rules regarding cost allowability for requirements than for DoW requirements. Examples of such allowable contract costs include the following []:
- Selling expenses
- Maintaining international sales and service organizations
- Sales commissions and fees in accordance with , subpart 3.4
- Sales promotions, demonstrations, and related travel for sales to foreign governments
- Configuration studies and related technical services undertaken as a direct selling effort to a foreign country
- Product support and post-delivery service expenses
- Operations or maintenance training, or tactics films, manuals, or other related data
- Technical field services provided in a foreign country related to accident investigations, problems, operations/tactics enhancement, and related travel to foreign countries
- Offset costs
The costs 225.7303-2 recognizes are those that are reasonable and allocable []. An acquisition wholly paid for from funds made available on a nonrepayable basis, such as nonrepayable Foreign Military Financing (), does not receive this treatment. It is priced on the same costing basis as an acquisition of like items the DoW buys for its own use, for profit, overhead, independent research and development, bid and proposal costs and other costing elements. Direct costs of meeting the purchaser’s additional or unique requirements remain allowable, but offset costs are not recoverable when the is financed with nonrepayable funds [].
Contingent fees, which include sales commissions and agents’ fees, are generally allowable under DoW contracts, except as 225.7303-4(b) provides. They are allowable provided that two conditions hold. The fees are paid to a bona fide employee or a bona fide established commercial or selling agency that the prospective contractor maintains to secure business, and the determines that the fees are fair and reasonable [].
For countries the manual does not list, sales commissions and fees on contracts cannot exceed $50,000 per contract, including all modifications and subcontracts, per country, unless the purchaser has identified and approved them in writing before [SAMM ]. 225.7303-4 sets the same amount per case: contingent fees above it are unallowable unless the contractor identifies the payment and the foreign customer approves it in writing before []. In addition, by exception, the countries listed in the manual must approve all contingent fees, regardless of value, before they can be considered allowable contract costs [SAMM ].
The countries the manual lists for that rule are Israel, Egypt, Jordan, Kuwait, Saudi Arabia, Pakistan, the Republic of Turkiye, Greece, Australia, Japan, Korea (Republic of), Taiwan, the Philippines, Thailand and Venezuela [SAMM ]. Any offered to one of these countries or entities that includes contingent fees must carry the Appendix 6 Contingent Fees note [SAMM ].
If contingent fees are part of a contract proposal, the purchasing government must be advised of them before, or together with, the submission of the , unless it has indicated otherwise. The notification includes the following: the name and address of the agent; the estimated amount of the proposed fee; the percentage of the sales price; and a statement on the fee. The statement says that appropriate officials of the DoW consider the fee to be fair and reasonable, that a portion of the proposed fee is considered fair and reasonable, or that the U.S. Government () cannot determine the reasonableness of the proposed fee. This statement is normally included as an note. The note also states that, by accepting the , the purchaser approves the sales commissions and fees involved [SAMM ].
All that include contingent fees, regardless of the value of the case, must be coordinated with the Office of Strategy, Plans, and Policy (SPP). The same applies to all correspondence with an international partner about contingent fees relative to data or an , and to all post- notifications about contingent fees [SAMM ].
The cannot approve as an allowable cost any contingent fee the purchaser has not approved. If the or the procurement activity determines that the agent is not bona fide, for reasons other than the reasonableness of the fee, an cannot be offered until the contractor deletes the unallowable costs [SAMM ].
References
SAMM
- SAMM C6.3.7.2.2
- SAMM C6.3.7.2.1
- SAMM C6.3.7.1: Prior Notification of Fees to Purchaser.
- SAMM C6.3.7.4
- SAMM C6.3.7.5: Disallowance of Contingent Fees.
Public authorities
- DFARS 225.7303-2: Defense Federal Acquisition Regulation Supplement 225.7303-2, Cost of doing business with a foreign government or an international organization
- DFARS 225.7303-5: Defense Federal Acquisition Regulation Supplement 225.7303-5, Acquisitions wholly paid for from nonrepayable funds
- DFARS 225.73: Defense Federal Acquisition Regulation Supplement Subpart 225.73, Acquisitions for Foreign Military Sales
- DFARS 225.7303-4: Defense Federal Acquisition Regulation Supplement 225.7303-4, Contingent fees
Facts referenced
- Ceiling on sales commissions and fees per FMS contract, per country, above which the purchaser must approve them in writing before award (countries not on the all-fees list): $50,000 (as of 26 October 2026; SAMM C6.3.7.2.2)
Related
Foreign Military Sales (FMS)
The part of U.S. security assistance, authorized by the Arms Export Control Act (AECA), in which eligible foreign governments and international organizations buy defense articles, services and training from the U.S. Government under formal government-to-government agreements.
The articles come either from Department of War stocks or from new procurement under contracts the Department manages [22 U.S.C. 2761, 22 U.S.C. 2762]. A sale is FMS whatever the source of the purchaser's financing.
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Federal Acquisition Regulation (FAR)
The FAR is the primary regulation for use by federal executive agencies for the acquisition of supplies and services with appropriated funds. The document, published in 1984, consolidated the major procurement regulations of various departments and agencies. The intent of the FAR is to standardize the content, decrease the volume of documents, and to achieve consistency throughout government. The principal agencies involved in putting together the FAR were DoD, the General Services Administration, and the National Aeronautics and Space Administration, the three largest buyers. The FAR is broader than just contracting and applies to all goods and services. It directs the defense program manager in many ways, including contract award procedures, acquisition planning, warranties, and establishing guidelines for competition. Besides the FAR, each agency has its supplement to describe its own particular way of doing business. The DoD supplement is called Defense FAR Supplement.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Contracting Officer
A person with the authority to enter into, administer, and/or terminate contracts and make related determinations and findings. The term includes certain authorized representatives of the Contracting Officer acting within the limits of their authority as delegated by the Contracting Officer. A Contracting Officer whose primary responsibility is to enter into contracts is called a procuring contracting officer. One whose primary responsibility is to administer contracts is called an administrative contracting officer. One whose primary responsibility is to terminate contracts and/or settle terminated contracts is called a "termination contracting officer." A single contracting officer may be responsible for duties in any or all of these areas.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
DFARS: Defense Federal Acquisition Regulation Supplement
SAMM Acronyms, as of 12 September 2026
FMS: Foreign Military Sale
SAMM Acronyms, as of 12 September 2026
Case Identifier
A unique six-digit identifier assigned to an Foreign Military Sales case for the purpose of identification, accounting, and data processing of each Letter of Offer and Acceptance. The case identifier consists of the two-letter country code, a one-letter designator for the Implementing Agency, and a three-letter case designator.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Weapon System
A combination of one or more weapons with all related equipment, materials, services, personnel, and means of delivery and deployment (if applicable) required for self-sufficiency.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Letter of Offer and Acceptance (LOA)
The legal instrument that lists the defense articles and services, including training, that the U.S. Government transfers to a foreign country or international organization, with their estimated costs and the terms and conditions. The benefitting partner does not sign a Building Partner Capacity (BPC) LOA.
The Letter of Offer and Acceptance (LOA) is the instrument the U.S. Government uses to sell under the Arms Export Control Act (AECA); signed LOAs and their later Amendments and Modifications are also called Foreign Military Sales (FMS) cases [SAMM C5.6.1].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Contract Award
This occurs when a contracting officer has signed and distributed a contract to a contractor.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
LOA: Letter of Offer and Acceptance
SAMM Acronyms, as of 12 September 2026
Defense Security Cooperation Agency (DSCA)
The Department of War agency that directs, administers and provides guidance to the Department's components and its representatives at U.S. missions for the execution of the security cooperation programs for which it is responsible [SAMM C1.3.2.2]. The agency also provides financial and technical assistance, arranges the transfer of defense materiel, training and services to international partners, and promotes military-to-military contacts.
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Price and Availability (P&A)
Preliminary pricing and availability estimates for articles or services that an Implementing Agency (IA) prepares at the request of a foreign government or international organization for an international competition, or of a U.S. Government requesting authority for building partner capacity.
Price and Availability (P&A) responses are estimates of cost and availability, not valid for preparing a Letter of Offer and Acceptance (LOA), and furnishing them does not commit the U.S. Government to offer the articles or services for sale [SAMM C5.5.2, C5.5.1].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Defense Federal Acquisition Regulation Supplement 225.7303-2, Cost of doing business with a foreign government or an international organization
DFARS 225.7303-2 · Regulation
Defense Federal Acquisition Regulation Supplement 225.7303-5, Acquisitions wholly paid for from nonrepayable funds
DFARS 225.7303-5 · Regulation
Defense Federal Acquisition Regulation Supplement Subpart 225.73, Acquisitions for Foreign Military Sales
DFARS 225.73 · Regulation
Defense Federal Acquisition Regulation Supplement 225.7303-4, Contingent fees
DFARS 225.7303-4 · Regulation
SAMM C6.3.7.2.2
“Sales commissions and fees applicable to FMS contracts for other countries cannot exceed $50,000 per contract (including all modifications and subcontracts thereto), per country, unless these fees have been identified and approved in writing by the purchaser before contract award. All such contingent fees must be justified and supported based on the criteria cited in the FAR and DFARS.”
Security Assistance Management Manual, as of 26 October 2026
SAMM C6.3.7.2.1
“The following countries must approve all contingent fees (regardless of dollar value) before they can be considered allowable FMS contract costs: Australia, Egypt, Greece, Israel, Japan, Jordan, Korea (Republic of), Kuwait, Pakistan, Philippines, Saudi Arabia, Taiwan, Thailand, the Republic of Turkiye, and Venezuela. Any LOA offered to these countries or entities that include contingent fees must include the Appendix 6 …”
Security Assistance Management Manual, as of 26 October 2026
SAMM C6.3.7.1: Prior Notification of Fees to Purchaser.
“Purchasers must be advised of all contingent fees (including agents’ fees and sales commissions) associated with an FMS case prior to or in conjunction with LOA submission to the purchaser unless the purchaser has indicated otherwise. For agents’ fees and sales commissions, such notices include: the name and address of the agent(s); the estimated amount of the proposed fee, and …”
Security Assistance Management Manual, as of 26 October 2026
SAMM C6.3.7.4
“For LOAs that include contingent fees (regardless of dollar value of the case), all correspondence with a purchaser on the subject of contingent fees relative to an LOA, and all post-LOA notifications about contingent fees must be coordinated with DSCA (SPP). For agents’ fees and sales commissions, the written submission must contain a certification that the agent is bona fide …”
Security Assistance Management Manual, as of 26 September 2026
SAMM C6.3.7.5: Disallowance of Contingent Fees.
“The contracting officer cannot approve as allowable costs any contingent fees not approved by the purchaser. If the contracting officer or procurement activity determines the agent is not bona fide for reasons other than fee reasonableness, an LOA cannot be offered until the unallowable costs are deleted by the contractor.”
Security Assistance Management Manual, as of 26 October 2026